X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=tcl%2Ftarget%2Fpic32mx.cfg;h=df68e807aeb504ab8b23b547803405df586b3928;hb=5ffc745ea39393d2fc2772bf11e996e237463004;hp=5e64cb84dd654fbd0b73ab0be265bd7b8b4f0672;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=fw%2Fopenocd

diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg
index 5e64cb84d..df68e807a 100644
--- a/tcl/target/pic32mx.cfg
+++ b/tcl/target/pic32mx.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
 } else {
@@ -23,7 +25,7 @@ if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE 0x4000
 }
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 #jtag scan chain
@@ -40,9 +42,9 @@ target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAM
 #
 
 global _PIC32MX_DATASIZE
-global _PIC32MX_PROGSIZE
+global _WORKAREASIZE
 set _PIC32MX_DATASIZE 0x800
-set _PIC32MX_PROGSIZE [expr ($_WORKAREASIZE - $_PIC32MX_DATASIZE)]
+set _PIC32MX_PROGSIZE [expr {$_WORKAREASIZE - $_PIC32MX_DATASIZE}]
 
 $_TARGETNAME configure -work-area-phys 0xa0000800 -work-area-size $_PIC32MX_PROGSIZE -work-area-backup 0
 $_TARGETNAME configure -event reset-init {
@@ -50,18 +52,31 @@ $_TARGETNAME configure -event reset-init {
 	# from reset the pic32 cannot execute code in ram - enable ram execution
 	# minimum offset from start of ram is 2k
 	#
-
 	global _PIC32MX_DATASIZE
-	global _PIC32MX_PROGSIZE
+	global _WORKAREASIZE
 
-	# BMXCON
-	mww 0xbf882000 0x001f0040
-	# BMXDKPBA: 2k kernel data @ 0xa0000800
+	# BMXCON	set 0 wait state option by clearing BMXWSDRM bit, bit 6
+	mww 0xbf882000 0x001f0000
+	# BMXDKPBA: 2k kernel data @ 0xa0000000
 	mww 0xbf882010 $_PIC32MX_DATASIZE
-	# BMXDUDBA: 16k kernel program @ 0xa0000800
-	mww 0xbf882020 $_PIC32MX_PROGSIZE
-	# BMXDUPBA: 0k user program
-	mww 0xbf882030 $_PIC32MX_PROGSIZE
+	# BMXDUDBA: 14k kernel program @ 0xa0000800 - (BMXDUDBA - BMXDKPBA)
+	mww 0xbf882020 $_WORKAREASIZE
+	# BMXDUPBA: 0k user program - (BMXDUPBA - BMXDUDBA)
+	mww 0xbf882030 $_WORKAREASIZE
+
+	#
+	# Set system clock to 8Mhz if the default clock configuration is set
+	#
+
+	# SYSKEY register, make sure OSCCON is locked
+	mww 0xbf80f230 0x0
+	# SYSKEY register, write unlock sequence
+	mww 0xbf80f230 0xaa996655
+	mww 0xbf80f230 0x556699aa
+	# OSCCON register + 4, clear OSCCON FRCDIV bits: 24, 25 and 26, divided by 1
+	mww 0xbf80f004 0x07000000
+	# SYSKEY register, relock OSCCON
+	mww 0xbf80f230 0x0
 }
 
 set _FLASHNAME $_CHIPNAME.flash0