X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=tcl%2Fboard%2Fstm3210e_eval.cfg;h=f08e04b0e4d1a4627f71ff2ed298bc6889b2ee8f;hb=ce217538bc2b9c5ef6dc760b0b03d54602ed3be6;hp=ab2f64f0aaeee028c2ff9dc87c988e7a085ed0e7;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf;p=fw%2Fopenocd

diff --git a/tcl/board/stm3210e_eval.cfg b/tcl/board/stm3210e_eval.cfg
index ab2f64f0a..f08e04b0e 100644
--- a/tcl/board/stm3210e_eval.cfg
+++ b/tcl/board/stm3210e_eval.cfg
@@ -1,3 +1,65 @@
-# This is an STM32 eval board with a single STM32F103ZET6 chip on it.
+# SPDX-License-Identifier: GPL-2.0-or-later
 
-source [find target/stm32.cfg]
+# This is an STM32 eval board with a single STM32F103ZET6 chip.
+# http://www.st.com/internet/evalboard/product/204176.jsp
+
+# increase working area to 32KB for faster flash programming
+set WORKAREASIZE 0x8000
+
+source [find target/stm32f1x.cfg]
+
+#
+# configure FSMC Bank 1 (NOR/PSRAM Bank 2) NOR flash
+# M29W128GL70ZA6E
+#
+
+set _FLASHNAME $_CHIPNAME.norflash
+flash bank $_FLASHNAME cfi 0x64000000 0x01000000 2 2 $_TARGETNAME
+
+proc stm32_enable_fsmc {} {
+
+	echo "Enabling FSMC Bank 1 (NOR/PSRAM Bank 2)"
+
+	# enable gpio (defg) clocks for fsmc
+	# RCC_APB2ENR
+	mww 0x40021018 0x000001E0
+
+	# enable fsmc clock
+	# RCC_AHBENR
+	mww 0x40021014 0x00000114
+
+	# configure gpio to alternate function
+	# GPIOD_CRL
+	mww 0x40011400 0x44BB44BB
+	# GPIOD_CRH
+	mww 0x40011404 0xBBBBBBBB
+
+	# GPIOE_CRL
+	mww 0x40011800 0xBBBBB444
+	# GPIOE_CRH
+	mww 0x40011804 0xBBBBBBBB
+
+	# GPIOF_CRL
+	mww 0x40011C00 0x44BBBBBB
+	# GPIOF_CRH
+	mww 0x40011C04 0xBBBB4444
+
+	# GPIOG_CRL
+	mww 0x40012000 0x44BBBBBB
+	# GPIOG_CRH
+	mww 0x40012004 0x444444B4
+
+	# setup fsmc timings
+	# FSMC_BCR1
+	mww 0xA0000008 0x00001058
+
+	# FSMC_BTR1
+	mww 0xA000000C 0x10000502
+
+	# FSMC_BCR1 - enable fsmc
+	mww 0xA0000008 0x00001059
+}
+
+$_TARGETNAME configure -event reset-init {
+	stm32_enable_fsmc
+}