X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=bbb04baa612b51d8bb760e199b45fcbeaa8342ab;hb=be22b93a445b26213860617bdb9c3c2c35806bef;hp=d47e9e2edcdaccc64915005740db6a1dc1f11a2f;hpb=7b2687b45bb1ff5fab478c76838a347f262d5f67;p=fw%2Fopenocd

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index d47e9e2ed..bbb04baa6 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,17 +1,19 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter_khz to be about 1200.
+# you may also need to reduce adapter speed to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s1968
 source [find target/stellaris.cfg]