X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=summon-arm-toolchain;h=03d5d4833dfa38a7bae451adad25e647bffed2f3;hb=b7a46ec0d9f6a59b4d461aeddbb1b4984e56cd14;hp=c8c29d54456a4c0d2306a0c59ddd3096b78a8dc0;hpb=ccb4e0ff2d07bddc8f15254dad6b7af4f169f064;p=fw%2Fcortex-toolchain diff --git a/summon-arm-toolchain b/summon-arm-toolchain index c8c29d5..03d5d48 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -8,6 +8,8 @@ # apt-get install flex bison libgmp3-dev libmpfr-dev libncurses5-dev \ # libmpc-dev autoconf texinfo build-essential # +# Or on Ubuntu Maverick give `apt-get build-dep gcc-4.5` a try. +# # Stop if any command fails set -e @@ -16,9 +18,22 @@ TARGET=arm-none-eabi # Or: TARGET=arm-elf PREFIX=${HOME}/arm-none-eabi # Install location of your final toolchain PARALLEL= # Or: PARALLEL="-j 5" for 4 CPUs DARWIN_OPT_PATH=/opt/local # Path in which MacPorts or Fink is installed +# Set to 'sudo' if you need superuser privileges while installing +SUDO= +# Set to 1 to be quieter while running +QUIET=0 + +# For FSF GCC: +GCCVERSION=4.5.1 +GCC=gcc-${GCCVERSION} +GCCURL=http://ftp.gnu.org/gnu/gcc/${GCC}/${GCC}.tar.gz + +# For the Linaro GCC: +# GCCVERSION=4.5-2010.08-1 +# GCC=gcc-linaro-${GCCVERSION} +# GCCURL=http://launchpad.net/gcc-linaro/4.5/${GCCVERSION}/+download/${GCC}.tar.gz BINUTILS=binutils-2.20 -GCC=gcc-4.5.1 NEWLIB=newlib-1.18.0 GDB=gdb-7.2 LIBCMSIS=v1.10-2 @@ -28,20 +43,36 @@ LIBOPENSTM32=master LIBSTM32_EN=0 LIBOPENSTM32_EN=0 -SUMMON_DIR=$(pwd) -SOURCES=${SUMMON_DIR}/sources -STAMPS=${SUMMON_DIR}/stamps - -export PATH="${PREFIX}/bin:${PATH}" - GCCFLAGS= GDBFLAGS= BINUTILFLAGS= +# To default to the Cortex-M3: +# GCCFLAGS="--with-arch=armv7-m --with-mode=thumb" + +# Pull in the local configuration, if any +if [ -f local.sh ]; then + . ./local.sh +fi + +MAKEFLAGS=${PARALLEL} +TARFLAGS=v + +if [ ${QUIET} != 0 ]; then + TARFLAGS= + MAKEFLAGS="${MAKEFLAGS} -s" +fi + +export PATH="${PREFIX}/bin:${PATH}" + +SUMMON_DIR=$(pwd) +SOURCES=${SUMMON_DIR}/sources +STAMPS=${SUMMON_DIR}/stamps + # Fetch a versioned file from a URL function fetch { if [ ! -e ${STAMPS}/$1.fetch ]; then - echo "Downloading $1 sources..." + log "Downloading $1 sources..." wget -c --no-passive-ftp $2 touch ${STAMPS}/$1.fetch fi @@ -56,8 +87,15 @@ function log { # Unpack an archive function unpack { + log Unpacking $* # Use 'auto' mode decompression. Replace with a switch if tar doesn't support -a - tar xvaf $1 + tar xaf${TARFLAGS} ${SOURCES}/$1.tar.* +} + +# Install a build +function install { + log $1 + ${SUDO} make ${MAKEFLAGS} $2 $3 $4 $5 $6 $7 $8 } case "$(uname)" in @@ -83,13 +121,13 @@ mkdir -p ${STAMPS} ${SOURCES} cd ${SOURCES} fetch ${BINUTILS} http://ftp.gnu.org/gnu/binutils/${BINUTILS}.tar.bz2 -fetch ${GCC} ${GCC_URL} +fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then - echo "Cloning libcmsis sources..." + log "Cloning libcmsis sources..." git clone git://git.open-bldc.org/libcmsis.git cd libcmsis git archive --format=tar --prefix=libcmsis-${LIBCMSIS}/ ${LIBCMSIS} | \ @@ -99,7 +137,7 @@ if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then fi if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then - echo "Cloning libstm32 sources..." + log "Cloning libstm32 sources..." git clone git://git.open-bldc.org/libstm32.git cd libstm32 git archive --format=tar --prefix=libstm32-${LIBSTM32}/ ${LIBSTM32} | \ @@ -109,7 +147,7 @@ if [ ! -e libstm32-${LIBSTM32}.tar.bz2 ]; then fi if [ ! -e libstm32usb-${LIBSTM32USB}.tar.bz2 ]; then - echo "Cloning libstm32usb sources..." + log "Cloning libstm32usb sources..." git clone git://git.open-bldc.org/libstm32usb.git cd libstm32usb git archive --format=tar --prefix=libstm32usb-${LIBSTM32USB}/ ${LIBSTM32USB} | \ @@ -121,7 +159,7 @@ fi if [ ${LIBOPENSTM32_EN} != 0 ]; then if [ ! -e libopenstm32-${LIBOPENSTM32}.tar.bz2 ]; then - echo "Cloning libopenstm32 sources..." + log "Cloning libopenstm32 sources..." git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32 cd libopenstm32 git archive --format=tar --prefix=libopenstm32-${LIBOPENSTM32}/ ${LIBOPENSTM32} | \ @@ -138,8 +176,7 @@ if [ ! -e build ]; then fi if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then - log "Unpacking ${BINUTILS}" - unpack ${SOURCES}/${BINUTILS}.tar.bz2 + unpack ${BINUTILS} cd build log "Configuring ${BINUTILS}" ../${BINUTILS}/configure --target=${TARGET} \ @@ -152,9 +189,8 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then --disable-werror \ ${BINUTILFLAGS} log "Building ${BINUTILS}" - make ${PARALLEL} - log "Installing ${BINUTILS}" - make install + make ${MAKEFLAGS} + install ${BINUTILS} install cd .. log "Cleaning up ${BINUTILS}" touch ${STAMPS}/${BINUTILS}.build @@ -162,8 +198,7 @@ if [ ! -e ${STAMPS}/${BINUTILS}.build ]; then fi if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then - log "Unpacking ${GCC}-boot" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} boot cd build log "Configuring ${GCC}-boot" ../${GCC}/configure --target=${TARGET} \ @@ -180,9 +215,8 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then --disable-werror \ ${GCCFLAGS} log "Building ${GCC}-boot" - make ${PARALLEL} all-gcc - log "Installing ${GCC}-boot" - make install-gcc + make ${MAKEFLAGS} all-gcc + install ${GCC}-boot install-gcc cd .. log "Cleaning up ${GCC}-boot" touch ${STAMPS}/${GCC}-boot.build @@ -190,8 +224,7 @@ if [ ! -e ${STAMPS}/${GCC}-boot.build ]; then fi if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then - log "Unpacking ${NEWLIB}" - unpack ${SOURCES}/${NEWLIB}.tar.gz + unpack ${NEWLIB} cd build log "Configuring ${NEWLIB}" ../${NEWLIB}/configure --target=${TARGET} \ @@ -204,9 +237,8 @@ if [ ! -e ${STAMPS}/${NEWLIB}.build ]; then --disable-werror \ --disable-newlib-supplied-syscalls log "Building ${NEWLIB}" - make ${PARALLEL} - log "Installing ${NEWLIB}" - make install + make ${MAKEFLAGS} + install ${NEWLIB} install cd .. log "Cleaning up ${NEWLIB}" touch ${STAMPS}/${NEWLIB}.build @@ -215,8 +247,7 @@ fi # Yes, you need to build gcc again! if [ ! -e ${STAMPS}/${GCC}.build ]; then - log "Unpacking ${GCC}" - unpack ${SOURCES}/${GCC}.tar.bz2 + unpack ${GCC} cd build log "Configuring ${GCC}" ../${GCC}/configure --target=${TARGET} \ @@ -232,9 +263,8 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then --disable-werror \ ${GCCFLAGS} log "Building ${GCC}" - make ${PARALLEL} - log "Installing ${GCC}" - make install + make ${MAKEFLAGS} + install ${GCC} install cd .. log "Cleaning up ${GCC}" touch ${STAMPS}/${GCC}.build @@ -242,8 +272,7 @@ if [ ! -e ${STAMPS}/${GCC}.build ]; then fi if [ ! -e ${STAMPS}/${GDB}.build ]; then - log "Unpacking ${GDB}" - unpack ${SOURCES}/${GDB}.tar.bz2 + unpack ${GDB} cd build log "Configuring ${GDB}" ../${GDB}/configure --target=${TARGET} \ @@ -253,9 +282,8 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then --disable-werror \ ${GDBFLAGS} log "Building ${GDB}" - make ${PARALLEL} - log "Installing ${GDB}" - make install + make ${MAKEFLAGS} + install ${GDB} install cd .. log "Cleaning up ${GDB}" touch ${STAMPS}/${GDB}.build @@ -264,13 +292,11 @@ fi if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then - log "Unpacking libcmsis-${LIBCMSIS}" - unpack ${SOURCES}/libcmsis-${LIBCMSIS}.tar.bz2 + unpack libcmsis-${LIBCMSIS} cd libcmsis-${LIBCMSIS} log "Building libcmsis-${LIBCMSIS}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libcmsis-${LIBCMSIS}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libcmsis-${LIBCMSIS} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libcmsis-${LIBCMSIS}" touch .libcmsis-${LIBCMSIS}.build @@ -278,13 +304,11 @@ if [ ! -e .libcmsis-${LIBCMSIS}.build ]; then fi if [ ! -e .libstm32-${LIBSTM32}.build ]; then - log "Unpacking libstm32-${LIBSTM32}" - unpack ${SOURCES}/libstm32-${LIBSTM32}.tar.bz2 + unpack libstm32-${LIBSTM32} cd libstm32-${LIBSTM32} log "Building libstm32-${LIBSTM32}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libstm32-${LIBSTM32}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libstm32-${LIBSTM32} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32-${LIBSTM32}" touch .libstm32-${LIBSTM32}.build @@ -292,13 +316,11 @@ if [ ! -e .libstm32-${LIBSTM32}.build ]; then fi if [ ! -e .libstm32usb-${LIBSTM32USB}.build ]; then - log "Unpacking libstm32usb-${LIBSTM32USB}" - unpack ${SOURCES}/libstm32usb-${LIBSTM32USB}.tar.bz2 + unpack libstm32usb-${LIBSTM32USB} cd libstm32usb-${LIBSTM32USB} log "Building libstm32usb-${LIBSTM32USB}" make arch_prefix=${TARGET} prefix=${PREFIX} - log "Installing libstm32usb-${LIBSTM32USB}" - make arch_prefix=${TARGET} prefix=${PREFIX} install + install libstm32usb-${LIBSTM32USB} arch_prefix=${TARGET} prefix=${PREFIX} install cd .. log "Cleaning up libstm32usb-${LIBSTM32USB}" touch .libstm32usb-${LIBSTM32USB}.build @@ -307,13 +329,11 @@ fi fi if [ $LIBOPENSTM32_EN != 0 ]; then - log "Unpacking libopenstm32-${LIBOPENSTM32}" - unpack ${SOURCES}/libopenstm32-${LIBOPENSTM32}.tar.bz2 + unpack libopenstm32-${LIBOPENSTM32} cd libopenstm32-${LIBOPENSTM32} log "Building libopenstm32-${LIBOPENSTM32}" make PREFIX=${TARGET} DESTDIR=${PREFIX} - log "Installing libopenstm32-${LIBOPENSTM32}" - make PREFIX=${TARGET} DESTDIR=${PREFIX} install + install libopenstm32-${LIBOPENSTM32} PREFIX=${TARGET} DESTDIR=${PREFIX} install cd .. log "Cleaning up libopenstm32-${LIBOPENSTM32}" touch .libopenstm32-${LIBOPENSTM32}.build