X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=sidebyside;f=doc%2Faltusmetrum.xsl;h=ae10afe951956ca315c5783b006f9c8fc7a7c1d8;hb=306028b33ebed45bcf379740cc3c01c2360c51f4;hp=30d98162a8254de181b115390e181c99c289903c;hpb=aa2edc97ac0c880e569baca453ff6302ad6da65f;p=fw%2Faltos
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 30d98162..ae10afe9 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1316,6 +1316,18 @@ NAR #88757, TRA #12200
terminals to hook up all of the pyro charges.
+
+ Using Only One Battery With TeleMega
+
+ Because TeleMega has built-in support for a separate pyro
+ battery, if you want to fly with just one battery running
+ both the computer and firing the charges, you need to
+ connect the flight computer battery to the pyro
+ circuit. TeleMega has two screw terminals for thisâhook a
+ wire from the Lipo terminal (Bottom 3) to the Pyro terminal
+ (Bottom 2).
+
+
Using an Active Switch with TeleMega
@@ -2932,9 +2944,10 @@ NAR #88757, TRA #12200
APRS Interval
- How often to transmit GPS information via APRS. This option
- is available on TeleMetrum v2 and TeleMega
- boards. TeleMetrum v1 boards cannot transmit APRS
+ How often to transmit GPS information via APRS (in
+ seconds). When set to zero, APRS transmission is
+ disabled. This option is available on TeleMetrum v2 and
+ TeleMega boards. TeleMetrum v1 boards cannot transmit APRS
packets. Note that a single APRS packet takes nearly a full
second to transmit, so enabling this option will prevent
sending any other telemetry during that time.