X-Git-Url: https://git.gag.com/?a=blobdiff_plain;ds=inline;f=doc%2Faltusmetrum.xsl;h=5dd93fdff287382690068444a336a15bc456d1c3;hb=2e6c6a6c15a7cff9f20b70a4cf58697da1302f01;hp=8339ca432c61dcb38d9f052e91df412e972ef36c;hpb=9728b20a4ad9576ac1022dc9a5771f5a3eb92b3d;p=fw%2Faltos
diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 8339ca43..5dd93fdf 100644
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -1291,6 +1291,16 @@ NAR #88757, TRA #12200
your local radio regulations.
+
+ Imperial Units
+
+ This switches between metric units (meters) and imperial
+ units (feet and miles). This affects the display of values
+ use during flight monitoring, data graphing and all of the
+ voice announcements. It does not change the units used when
+ exporting to CSV files, those are always produced in metric units.
+
+
Font Size
@@ -1320,6 +1330,73 @@ NAR #88757, TRA #12200
+
+ Configure Groundstation
+
+ Select this button and then select a TeleDongle Device from the list provided.
+
+
+ The first few lines of the dialog provide information about the
+ connected device, including the product name,
+ software version and hardware serial number. Below that are the
+ individual configuration entries.
+
+
+ Note that the TeleDongle itself doesn't save any configuration
+ data, the settings here are recorded on the local machine in
+ the Java preferences database. Moving the TeleDongle to
+ another machine, or using a different user account on the same
+ machine will cause settings made here to have no effect.
+
+
+ At the bottom of the dialog, there are three buttons:
+
+
+
+
+ Save. This writes any changes to the
+ local Java preferences file. If you don't
+ press this button, any changes you make will be lost.
+
+
+
+
+ Reset. This resets the dialog to the most recently saved values,
+ erasing any changes you have made.
+
+
+
+
+ Close. This closes the dialog. Any unsaved changes will be
+ lost.
+
+
+
+
+ The rest of the dialog contains the parameters to be configured.
+
+
+ Frequency
+
+ This configures the frequency to use for both telemetry and
+ packet command mode. Set this before starting any operation
+ involving packet command mode so that it will use the right
+ frequency. Telemetry monitoring mode also provides a menu to
+ change the frequency, and that menu also sets the same Java
+ preference value used here.
+
+
+
+ Radio Calibration
+
+ The radios in every Altus Metrum device are calibrated at the
+ factory to ensure that they transmit and receive on the
+ specified frequency. To change a TeleDongle's calibration,
+ you must reprogram the unit completely, so this entry simply
+ shows the current value and doesn't allow any changes.
+
+
+