--- /dev/null
+/*
+ * Copyright 2007,2008 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include "bool.h"
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_passthru_v2.h"
+#include "memcpy_wa.h"
+#include "clocks.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+
+#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now)
+
+#if (FW_SETS_SEQNO)
+static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers
+#endif
+
+
+/*
+ * Full duplex Tx and Rx between ethernet and serdes
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow
+ * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow
+ */
+//#define CPU_RX_BUF 0 // eth -> cpu
+
+#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer)
+#define DSP_RX_BUF_1 3 // serdes -> eth
+#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer)
+#define DSP_TX_BUF_1 5 // eth -> serdes
+
+/*
+ * ================================================================
+ * configure serdes double buffering state machine (eth -> serdes)
+ * ================================================================
+ */
+
+
+// Receive from ethernet
+buf_cmd_args_t dsp_tx_recv_args = {
+ PORT_ETH,
+ 0,
+ BP_LAST_LINE
+};
+
+// send to serdes
+buf_cmd_args_t dsp_tx_send_args = {
+ PORT_SERDES,
+ 0,
+ 0 // filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm; // the state machine
+
+/*
+ * ====================================================================
+ * configure serdes RX double buffering state machine (serdes -> eth)
+ * ====================================================================
+ */
+
+// receive from serdes
+buf_cmd_args_t dsp_rx_recv_args = {
+ PORT_SERDES,
+ 0,
+ BP_LAST_LINE
+};
+
+// send to ETH
+buf_cmd_args_t dsp_rx_send_args = {
+ PORT_ETH,
+ 0, // starts with ethernet header in line 0
+ 0, // filled in from list_line register
+};
+
+dbsm_t dsp_rx_sm; // the state machine
+
+
+// The mac address of the host we're sending to.
+u2_mac_addr_t host_mac_addr;
+
+
+// ----------------------------------------------------------------
+
+
+#if (FW_SETS_SEQNO)
+/*
+ * Debugging ONLY. This will be handled by the tx_protocol_engine.
+ *
+ * This is called when the DSP Rx chain has filled in a packet.
+ * We set and increment the seqno, then return false, indicating
+ * that we didn't handle the packet. A bit of a kludge
+ * but it should work.
+ */
+
+bool
+fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false
+{
+#if 0
+ uint32_t *p = buffer_ram(buf_this);
+ uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj;
+ printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n",
+ buf_this, last_line);
+
+ print_buffer(p, (last_line + 1));
+#endif
+
+#if 0
+ uint32_t *p = buffer_ram(buf_this);
+ uint32_t seqno = fw_seqno++;
+
+ // KLUDGE all kinds of nasty magic numbers and embedded knowledge
+ uint32_t t = p[4];
+ t = (t & 0xffff00ff) | ((seqno & 0xff) << 8);
+ p[4] = t;
+#endif
+
+ return false; // we didn't handle the packet
+}
+#endif
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+ uint32_t status = buffer_pool_status->status;
+
+ if (0 && (status & ~BPS_IDLE_ALL)){
+ putstr("status = ");
+ puthex32_nl(status);
+ }
+
+ dbsm_process_status(&dsp_tx_sm, status);
+ dbsm_process_status(&dsp_rx_sm, status);
+}
+
+int
+main(void)
+{
+ u2_init();
+
+ output_regs->led_src = 0x3; // h/w controls bottom two bits
+ clocks_enable_test_clk(true, 1);
+
+ putstr("\neth <-> serdes\n");
+
+ ethernet_register_link_changed_callback(link_changed_callback);
+ ethernet_init();
+
+ // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO);
+ clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO);
+
+#if 0
+ // make bit 15 of Tx gpio's be a s/w output
+ hal_gpio_set_sel(GPIO_TX_BANK, 15, 's');
+ hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000);
+#endif
+
+#if 1
+ output_regs->debug_mux_ctrl = 1;
+ hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111");
+ hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111");
+ hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff);
+ hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff);
+#endif
+
+
+ // initialize double buffering state machine for ethernet -> serdes
+
+ dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0,
+ &dsp_tx_recv_args, &dsp_tx_send_args,
+ eth_pkt_inspector);
+
+
+ // initialize double buffering state machine for serdes -> ethernet
+
+ if (FW_SETS_SEQNO){
+ dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0,
+ &dsp_rx_recv_args, &dsp_rx_send_args,
+ fw_sets_seqno_inspector);
+ }
+ else {
+ dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0,
+ &dsp_rx_recv_args, &dsp_rx_send_args,
+ dbsm_nop_inspector);
+ }
+
+ // tell app_common that this dbsm could be sending to the ethernet
+ ac_could_be_sending_to_eth = &dsp_rx_sm;
+
+
+ // kick off the state machines
+ dbsm_start(&dsp_tx_sm);
+ dbsm_start(&dsp_rx_sm);
+
+ //int which = 0;
+
+ while(1){
+ // hal_gpio_write(GPIO_TX_BANK, which, 0x8000);
+ // which ^= 0x8000;
+
+ buffer_irq_handler(0);
+ }
+}
projects / debian / gnuradio / blobdiff