-/*
- * Copyright 2009 Ettus Research LLC
- */
+//
+// Copyright 2009 Free Software Foundation, Inc.
+//
+// This file is part of GNU Radio
+//
+// GNU Radio is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either asversion 3, or (at your option)
+// any later version.
+//
+// GNU Radio is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Radio; see the file COPYING. If not, write to
+// the Free Software Foundation, Inc., 51 Franklin Street,
+// Boston, MA 02110-1301, USA.
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
-#include <usrp/db_wbxng_adf4350.h>
-#include <usrp/db_wbxng_adf4350_regs.h>
+#include "db_wbxng_adf4350.h"
#include <db_base_impl.h>
#include <stdio.h>
-//#include "io.h"
-//#include "spi.h"
-#define INPUT_REF_FREQ FREQ_C(10e6)
+#define FREQ_C(freq) uint64_t(freq)
+#define INPUT_REF_FREQ FREQ_C(64e6)
#define DIV_ROUND(num, denom) (((num) + ((denom)/2))/(denom))
-#define FREQ_C(freq) ((uint32_t)DIV_ROUND(freq, (uint32_t)1000))
#define INPUT_REF_FREQ_2X (2*INPUT_REF_FREQ) /* input ref freq with doubler turned on */
#define MIN_INT_DIV uint16_t(23) /* minimum int divider, prescaler 4/5 only */
#define MAX_RF_DIV uint8_t(16) /* max rf divider, divides rf output */
#define MIN_VCO_FREQ FREQ_C(2.2e9) /* minimum vco freq */
#define MAX_VCO_FREQ FREQ_C(4.4e9) /* minimum vco freq */
-#define MAX_FREQ MAX_VCO_FREQ /* upper bound freq (rf div = 1) */
+#define MAX_FREQ DIV_ROUND(MAX_VCO_FREQ, 1) /* upper bound freq (rf div = 1) */
#define MIN_FREQ DIV_ROUND(MIN_VCO_FREQ, MAX_RF_DIV) /* calculated lower bound freq */
#define CE_PIN (1 << 3)
#define MUX_PIN (1 << 1)
#define LD_PIN (1 << 0)
-adf4350::adf4350(usrp_basic_sptr _usrp, int _which, int _spi_enable){
- /* Initialize the pin directions. */
+adf4350::adf4350(usrp_basic_sptr _usrp, int _which, int _spi_enable)
+{
+ /* Initialize the pin directions. */
d_usrp = _usrp;
d_which = _which;
d_regs = new adf4350_regs(this);
/* Outputs */
- d_usrp->_write_oe(d_which, (CE_PIN | PDB_RF_PIN), 0xffff);
-
- /* Initialize the pin levels. */
- _enable(true);
- /* Initialize the registers. */
- d_regs->_load_register(5);
- d_regs->_load_register(4);
- d_regs->_load_register(3);
- d_regs->_load_register(2);
- d_regs->_load_register(1);
- d_regs->_load_register(0);
+ d_usrp->_write_oe(d_which, (CE_PIN | PDB_RF_PIN), (CE_PIN | PDB_RF_PIN));
+ d_usrp->write_io(d_which, (CE_PIN), (CE_PIN | PDB_RF_PIN));
+
+ /* Initialize the pin levels. */
+ _enable(true);
+ /* Initialize the registers. */
+ d_regs->_load_register(5);
+ d_regs->_load_register(4);
+ d_regs->_load_register(3);
+ d_regs->_load_register(2);
+ d_regs->_load_register(1);
+ d_regs->_load_register(0);
}
-adf4350::~adf4350(){
+adf4350::~adf4350()
+{
+ d_usrp->write_io(d_which, (0), (CE_PIN | PDB_RF_PIN));
delete d_regs;
}
-freq_t
-adf4350::_get_max_freq(void){
- return MAX_FREQ;
+freq_t
+adf4350::_get_max_freq(void)
+{
+ return MAX_FREQ;
}
-freq_t
-adf4350::_get_min_freq(void){
- return MIN_FREQ;
+freq_t
+adf4350::_get_min_freq(void)
+{
+ return MIN_FREQ;
}
-bool
-adf4350::_get_locked(void){
+bool
+adf4350::_get_locked(void)
+{
return d_usrp->read_io(d_which) & LD_PIN;
}
-void
-adf4350::_enable(bool enable){
- if (enable){ /* chip enable */
- d_usrp->write_io(d_which, 1, CE_PIN);
- }else{
- d_usrp->write_io(d_which, 0, CE_PIN);
- }
+void
+adf4350::_enable(bool enable)
+{
+ if (enable){ /* chip enable */
+ d_usrp->write_io(d_which, (PDB_RF_PIN), (PDB_RF_PIN));
+ }else{
+ d_usrp->write_io(d_which, 0, (PDB_RF_PIN));
+ }
}
-void
-adf4350::_write(uint8_t addr, uint32_t data){
- data |= addr;
+void
+adf4350::_write(uint8_t addr, uint32_t data)
+{
+ data |= addr;
// create str from data here
char s[4];
s[1] = (char)((data >> 16) & 0xff);
s[2] = (char)((data >> 8) & 0xff);
s[3] = (char)(data & 0xff);
- std::string str(s, 3);
+ std::string str(s, 4);
+ timespec t;
+ t.tv_sec = 0;
+ t.tv_nsec = 5e6;
+
+ nanosleep(&t, NULL);
d_usrp->_write_spi(0, d_spi_enable, d_spi_format, str);
- /* pulse latch */
+ nanosleep(&t, NULL);
+
+ //fprintf(stderr, "Wrote to WBXNG SPI address %d with data %8x\n", addr, data);
+ /* pulse latch */
//d_usrp->write_io(d_which, 1, LE_PIN);
//d_usrp->write_io(d_which, 0, LE_PIN);
}
-bool
-adf4350::_set_freq(freq_t freq){
- /* Set the frequency by setting int, frac, mod, r, div */
- if (freq > MAX_FREQ || freq < MIN_FREQ) return false;
- /* Ramp up the RF divider until the VCO is within range. */
- d_regs->d_divider_select = 0;
- while (freq < MIN_VCO_FREQ){
- freq <<= 1; //double the freq
- d_regs->d_divider_select++; //double the divider
- }
- /* Ramp up the R divider until the N divider is at least the minimum. */
- d_regs->d_10_bit_r_counter = INPUT_REF_FREQ_2X*MIN_INT_DIV/freq;
- uint64_t n_mod;
- do{
- d_regs->d_10_bit_r_counter++;
- n_mod = freq;
- n_mod *= d_regs->d_10_bit_r_counter;
- n_mod *= d_regs->d_mod;
- n_mod /= INPUT_REF_FREQ_2X;
- /* calculate int and frac */
- d_regs->d_int = n_mod/d_regs->d_mod;
- d_regs->d_frac = (n_mod - (freq_t)d_regs->d_int*d_regs->d_mod) & uint16_t(0xfff);
- /*printf(
- "VCO %lu KHz, Int %u, Frac %u, Mod %u, R %u, Div %u\n",
- freq, d_regs->d_int, d_regs->d_frac,
- d_regs->d_mod, d_regs->d_10_bit_r_counter, (1 << d_regs->d_divider_select)
- );*/
- }while(d_regs->d_int < MIN_INT_DIV);
- /* calculate the band select so PFD is under 125 KHz */
- d_regs->d_8_bit_band_select_clock_divider_value = \
- INPUT_REF_FREQ_2X/(FREQ_C(125e3)*d_regs->d_10_bit_r_counter) + 1;
- /* load involved registers */
- d_regs->_load_register(2);
- d_regs->_load_register(4);
- d_regs->_load_register(0); /* register 0 must be last */
- return true;
+bool
+adf4350::_set_freq(freq_t freq)
+{
+ /* Set the frequency by setting int, frac, mod, r, div */
+ if (freq > MAX_FREQ || freq < MIN_FREQ) return false;
+ int min_int_div = 23;
+ d_regs->d_prescaler = 0;
+ if (freq > FREQ_C(3e9)) {
+ min_int_div = 75;
+ d_regs->d_prescaler = 1;
+ }
+ /* Ramp up the RF divider until the VCO is within range. */
+ d_regs->d_divider_select = 0;
+ while (freq < MIN_VCO_FREQ){
+ freq <<= 1; //double the freq
+ d_regs->d_divider_select++; //double the divider
+ }
+ /* Ramp up the R divider until the N divider is at least the minimum. */
+ //d_regs->d_10_bit_r_counter = INPUT_REF_FREQ*MIN_INT_DIV/freq;
+ d_regs->d_10_bit_r_counter = 2;
+ uint64_t n_mod;
+ do{
+ d_regs->d_10_bit_r_counter++;
+ n_mod = freq;
+ n_mod *= d_regs->d_10_bit_r_counter;
+ n_mod *= d_regs->d_mod;
+ n_mod /= INPUT_REF_FREQ;
+ /* calculate int and frac */
+ d_regs->d_int = n_mod/d_regs->d_mod;
+ d_regs->d_frac = (n_mod - (freq_t)d_regs->d_int*d_regs->d_mod) & uint16_t(0xfff);
+ /*
+ fprintf(stderr,
+ "VCO %lu KHz, Int %u, Frac %u, Mod %u, R %u, Div %u\n",
+ freq, d_regs->d_int, d_regs->d_frac,
+ d_regs->d_mod, d_regs->d_10_bit_r_counter, (1 << d_regs->d_divider_select)
+ );
+ */
+ }while(d_regs->d_int < min_int_div);
+ /* calculate the band select so PFD is under 125 KHz */
+ d_regs->d_8_bit_band_select_clock_divider_value = \
+ INPUT_REF_FREQ/(FREQ_C(30e3)*d_regs->d_10_bit_r_counter) + 1;
+ /*
+ fprintf(stderr, "Band Selection: Div %u, Freq %lu\n",
+ d_regs->d_8_bit_band_select_clock_divider_value,
+ INPUT_REF_FREQ/(d_regs->d_8_bit_band_select_clock_divider_value * d_regs->d_10_bit_r_counter) + 1
+ );
+ */
+ d_regs->_load_register(5);
+ d_regs->_load_register(3);
+ d_regs->_load_register(1);
+ /* load involved registers */
+ d_regs->_load_register(2);
+ d_regs->_load_register(4);
+ d_regs->_load_register(0); /* register 0 must be last */
+ return true;
}
-freq_t
-adf4350::_get_freq(void){
- /* Calculate the freq from int, frac, mod, ref, r, div:
- * freq = (int + frac/mod) * (ref/r)
- * Keep precision by doing multiplies first:
- * freq = (((((((int)*mod) + frac)*ref)/mod)/r)/div)
- */
- uint64_t temp;
- temp = d_regs->d_int;
- temp *= d_regs->d_mod;
- temp += d_regs->d_frac;
- temp *= INPUT_REF_FREQ_2X;
- temp /= d_regs->d_mod;
- temp /= d_regs->d_10_bit_r_counter;
- temp /= (1 << d_regs->d_divider_select);
- return temp;
+freq_t
+adf4350::_get_freq(void)
+{
+ /* Calculate the freq from int, frac, mod, ref, r, div:
+ * freq = (int + frac/mod) * (ref/r)
+ * Keep precision by doing multiplies first:
+ * freq = (((((((int)*mod) + frac)*ref)/mod)/r)/div)
+ */
+ uint64_t temp;
+ temp = d_regs->d_int;
+ temp *= d_regs->d_mod;
+ temp += d_regs->d_frac;
+ temp *= INPUT_REF_FREQ;
+ temp /= d_regs->d_mod;
+ temp /= d_regs->d_10_bit_r_counter;
+ temp /= (1 << d_regs->d_divider_select);
+ return temp;
}
projects / debian / gnuradio / blobdiff