enum usrp_load_status_t { ULS_ERROR = 0, ULS_OK, ULS_ALREADY_LOADED };
-struct usb_dev_handle;
-struct usb_device;
+struct libusb_device_handle;
+struct libusb_device;
/*!
* \brief initialize libusb; probe busses and devices.
* configured USRP (firmware loaded)
* unconfigured Cypress FX2 (only if fx2_ok_p is true)
*/
-struct usb_device *usrp_find_device (int nth, bool fx2_ok_p = false);
+struct libusb_device *usrp_find_device (int nth, bool fx2_ok_p = false);
-bool usrp_usrp_p (struct usb_device *q); //< is this a USRP
-bool usrp_usrp0_p (struct usb_device *q); //< is this a USRP Rev 0
-bool usrp_usrp1_p (struct usb_device *q); //< is this a USRP Rev 1
-bool usrp_usrp2_p (struct usb_device *q); //< is this a USRP Rev 2
-int usrp_hw_rev (struct usb_device *q); //< return h/w rev code
+bool usrp_usrp_p (struct libusb_device *q); //< is this a USRP
+bool usrp_usrp0_p (struct libusb_device *q); //< is this a USRP Rev 0
+bool usrp_usrp1_p (struct libusb_device *q); //< is this a USRP Rev 1
+bool usrp_usrp2_p (struct libusb_device *q); //< is this a USRP Rev 2
+int usrp_hw_rev (struct libusb_device *q); //< return h/w rev code
-bool usrp_fx2_p (struct usb_device *q); //< is this an unconfigured Cypress FX2
+bool usrp_fx2_p (struct libusb_device *q); //< is this an unconfigured Cypress FX2
-bool usrp_unconfigured_usrp_p (struct usb_device *q); //< some kind of unconfigured USRP
-bool usrp_configured_usrp_p (struct usb_device *q); //< some kind of configured USRP
+bool usrp_unconfigured_usrp_p (struct libusb_device *q); //< some kind of unconfigured USRP
+bool usrp_configured_usrp_p (struct libusb_device *q); //< some kind of configured USRP
/*!
- * \brief given a usb_device return an instance of the appropriate usb_dev_handle
+ * \brief given a libusb_device return an instance of the appropriate libusb_device_handle
*
* These routines claim the specified interface and select the
* correct alternate interface. (USB nomenclature is totally screwed!)
* If interface can't be opened, or is already claimed by some other
* process, 0 is returned.
*/
-struct usb_dev_handle *usrp_open_cmd_interface (struct usb_device *dev);
-struct usb_dev_handle *usrp_open_rx_interface (struct usb_device *dev);
-struct usb_dev_handle *usrp_open_tx_interface (struct usb_device *dev);
+struct libusb_device_handle *usrp_open_cmd_interface (struct libusb_device *dev);
+struct libusb_device_handle *usrp_open_rx_interface (struct libusb_device *dev);
+struct libusb_device_handle *usrp_open_tx_interface (struct libusb_device *dev);
/*!
* \brief close interface.
*/
-bool usrp_close_interface (struct usb_dev_handle *udh);
+bool usrp_close_interface (struct libusb_device_handle *udh);
/*!
* \brief load intel hex format file into USRP/Cypress FX2 (8051).
*/
usrp_load_status_t
-usrp_load_firmware (struct usb_dev_handle *udh, const char *filename, bool force);
+usrp_load_firmware (struct libusb_device_handle *udh, const char *filename, bool force);
/*!
* \brief load intel hex format file into USRP FX2 (8051).
* \brief load fpga configuration bitstream
*/
usrp_load_status_t
-usrp_load_fpga (struct usb_dev_handle *udh, const char *filename, bool force);
+usrp_load_fpga (struct libusb_device_handle *udh, const char *filename, bool force);
/*!
* \brief load the regular firmware and fpga bitstream in the Nth USRP.
* \brief copy the given \p hash into the USRP hash slot \p which.
* The usrp implements two hash slots, 0 and 1.
*/
-bool usrp_set_hash (struct usb_dev_handle *udh, int which,
+bool usrp_set_hash (struct libusb_device_handle *udh, int which,
const unsigned char hash[USRP_HASH_SIZE]);
/*!
* \brief retrieve the \p hash from the USRP hash slot \p which.
* The usrp implements two hash slots, 0 and 1.
*/
-bool usrp_get_hash (struct usb_dev_handle *udh, int which,
+bool usrp_get_hash (struct libusb_device_handle *udh, int which,
unsigned char hash[USRP_HASH_SIZE]);
-bool usrp_write_fpga_reg (struct usb_dev_handle *udh, int reg, int value);
-bool usrp_read_fpga_reg (struct usb_dev_handle *udh, int reg, int *value);
-bool usrp_set_fpga_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_led (struct usb_dev_handle *udh, int which, bool on);
+bool usrp_write_fpga_reg (struct libusb_device_handle *udh, int reg, int value);
+bool usrp_read_fpga_reg (struct libusb_device_handle *udh, int reg, int *value);
+bool usrp_set_fpga_reset (struct libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_enable (struct libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_enable (struct libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_reset (struct libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_reset (struct libusb_device_handle *udh, bool on);
+bool usrp_set_led (struct libusb_device_handle *udh, int which, bool on);
-bool usrp_check_rx_overrun (struct usb_dev_handle *udh, bool *overrun_p);
-bool usrp_check_tx_underrun (struct usb_dev_handle *udh, bool *underrun_p);
+bool usrp_check_rx_overrun (struct libusb_device_handle *udh, bool *overrun_p);
+bool usrp_check_tx_underrun (struct libusb_device_handle *udh, bool *underrun_p);
// i2c_read and i2c_write are limited to a maximum len of 64 bytes.
-bool usrp_i2c_write (struct usb_dev_handle *udh, int i2c_addr,
+bool usrp_i2c_write (struct libusb_device_handle *udh, int i2c_addr,
const void *buf, int len);
-bool usrp_i2c_read (struct usb_dev_handle *udh, int i2c_addr,
+bool usrp_i2c_read (struct libusb_device_handle *udh, int i2c_addr,
void *buf, int len);
// spi_read and spi_write are limited to a maximum of 64 bytes
// See usrp_spi_defs.h for more info
-bool usrp_spi_write (struct usb_dev_handle *udh,
+bool usrp_spi_write (struct libusb_device_handle *udh,
int optional_header, int enables, int format,
const void *buf, int len);
-bool usrp_spi_read (struct usb_dev_handle *udh,
+bool usrp_spi_read (struct libusb_device_handle *udh,
int optional_header, int enables, int format,
void *buf, int len);
-bool usrp_9862_write (struct usb_dev_handle *udh,
+bool usrp_9862_write (struct libusb_device_handle *udh,
int which_codec, // [0, 1]
int regno, // [0, 63]
int value); // [0, 255]
-bool usrp_9862_read (struct usb_dev_handle *udh,
+bool usrp_9862_read (struct libusb_device_handle *udh,
int which_codec, // [0, 1]
int regno, // [0, 63]
unsigned char *value); // [0, 255]
* \p buf contains alternating register_number, register_value pairs.
* \p len must be even and is the length of buf in bytes.
*/
-bool usrp_9862_write_many (struct usb_dev_handle *udh, int which_codec,
+bool usrp_9862_write_many (struct libusb_device_handle *udh, int which_codec,
const unsigned char *buf, int len);
/*!
* \brief write specified regs to all 9862's in the system
*/
-bool usrp_9862_write_many_all (struct usb_dev_handle *udh,
+bool usrp_9862_write_many_all (struct libusb_device_handle *udh,
const unsigned char *buf, int len);
// Write 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
// Which EEPROM is determined by i2c_addr. See i2c_addr.h
-bool usrp_eeprom_write (struct usb_dev_handle *udh, int i2c_addr,
+bool usrp_eeprom_write (struct libusb_device_handle *udh, int i2c_addr,
int eeprom_offset, const void *buf, int len);
// Read 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
// Which EEPROM is determined by i2c_addr. See i2c_addr.h
-bool usrp_eeprom_read (struct usb_dev_handle *udh, int i2c_addr,
+bool usrp_eeprom_read (struct libusb_device_handle *udh, int i2c_addr,
int eeprom_offset, void *buf, int len);
* binary values. Although dacs 0, 1 and 2 are 8-bit and dac 3 is 12-bit,
* the interface is in terms of 12-bit values [0,4095]
*/
-bool usrp_write_aux_dac (struct usb_dev_handle *uhd, int slot,
+bool usrp_write_aux_dac (struct libusb_device_handle *uhd, int slot,
int which_dac, int value);
/*!
* \p which_adc: [0,1] which of the two adcs to read
* \p *value: return value, 12-bit straight binary.
*/
-bool usrp_read_aux_adc (struct usb_dev_handle *udh, int slot,
+bool usrp_read_aux_adc (struct libusb_device_handle *udh, int slot,
int which_adc, int *value);
* \brief Read and return parsed daughterboard eeprom
*/
usrp_dbeeprom_status_t
-usrp_read_dboard_eeprom (struct usb_dev_handle *udh,
+usrp_read_dboard_eeprom (struct libusb_device_handle *udh,
int slot_id, usrp_dboard_eeprom *eeprom);
/*!
* \brief write ADC/DAC offset calibration constants to d'board eeprom
*/
-bool usrp_write_dboard_offsets (struct usb_dev_handle *udh, int slot_id,
+bool usrp_write_dboard_offsets (struct libusb_device_handle *udh, int slot_id,
short offset0, short offset1);
/*!
* Note that this only works on a configured usrp.
* \returns non-zero length string iff successful.
*/
-std::string usrp_serial_number(struct usb_dev_handle *udh);
+std::string usrp_serial_number(struct libusb_device_handle *udh);
#endif /* _USRP_PRIMS_H_ */
projects / debian / gnuradio / blobdiff