Remove usrp1 and usrp2 FPGA files. These are now hosted at:

[debian/gnuradio] / usrp / fpga / toplevel / include / common_config_1rxhb_1tx.vh

diff --git a/usrp/fpga/toplevel/include/common_config_1rxhb_1tx.vh b/usrp/fpga/toplevel/include/common_config_1rxhb_1tx.vh
deleted file mode 100644 (file)
index fb2e915..0000000
--- a/usrp/fpga/toplevel/include/common_config_1rxhb_1tx.vh
+++ /dev/null
@@ -1,61 +0,0 @@
-// -*- verilog -*-
-//
-//  USRP - Universal Software Radio Peripheral
-//
-//  Copyright (C) 2006 Matt Ettus
-//
-//  This program is free software; you can redistribute it and/or modify
-//  it under the terms of the GNU General Public License as published by
-//  the Free Software Foundation; either version 2 of the License, or
-//  (at your option) any later version.
-//
-//  This program is distributed in the hope that it will be useful,
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  GNU General Public License for more details.
-//
-//  You should have received a copy of the GNU General Public License
-//  along with this program; if not, write to the Free Software
-//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
-//
-
-// ------------------------------------------------------------
-// If TX_ON is not defined, there is *no* transmit circuitry built
-  `define TX_ON
-
-// ------------------------------------------------------------
-// Define 1 and only one of TX_SINGLE, TX_DUAL and TX_QUAD
-// to respectively enable 1, 2 or 4 transmit channels.
-// [Please note that only TX_SINGLE and TX_DUAL are currently valid]
-  `define TX_SINGLE
-//`define TX_DUAL
-//`define TX_QUAD
-
-// ------------------------------------------------------------
-// Define TX_HB_ON to enable the transmit halfband filter
-// [Not implemented]
-//`define TX_HB_ON
-
-// ------------------------------------------------------------
-// IF RX_ON is not defined, there is *no* receive circuitry built
-  `define RX_ON
-
-// ------------------------------------------------------------
-// Define 1 and only one of RX_SINGLE, RX_DUAL and RX_QUAD
-// to respectively define 1, 2 or 4 receive channels.
-
-  `define RX_SINGLE
-//`define RX_DUAL
-//`define RX_QUAD
-
-// ------------------------------------------------------------
-// Define RX_HB_ON to enable the receive halfband filter
-  `define RX_HB_ON
-
-// ------------------------------------------------------------
-// Define RX_NCO_ON to enable the receive Numerical Controlled Osc
-  `define RX_NCO_ON
-
-// ------------------------------------------------------------
-// Define RX_CIC_ON to enable the receive Cascaded Integrator Comb filter
-  `define RX_CIC_ON