Remove usrp1 and usrp2 FPGA files. These are now hosted at:

[debian/gnuradio] / usrp / fpga / sdr_lib / phase_acc.v

diff --git a/usrp/fpga/sdr_lib/phase_acc.v b/usrp/fpga/sdr_lib/phase_acc.v
deleted file mode 100755 (executable)
index f44853d..0000000
--- a/usrp/fpga/sdr_lib/phase_acc.v
+++ /dev/null
@@ -1,52 +0,0 @@
-// -*- verilog -*-
-//
-//  USRP - Universal Software Radio Peripheral
-//
-//  Copyright (C) 2003 Matt Ettus
-//
-//  This program is free software; you can redistribute it and/or modify
-//  it under the terms of the GNU General Public License as published by
-//  the Free Software Foundation; either version 2 of the License, or
-//  (at your option) any later version.
-//
-//  This program is distributed in the hope that it will be useful,
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  GNU General Public License for more details.
-//
-//  You should have received a copy of the GNU General Public License
-//  along with this program; if not, write to the Free Software
-//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
-//
-
-
-
-// Basic Phase accumulator for DDS
-
-
-module phase_acc (clk,reset,enable,strobe,serial_addr,serial_data,serial_strobe,phase);   
-   parameter FREQADDR = 0;
-   parameter PHASEADDR = 0;
-   parameter resolution = 32;
-   
-   input     clk, reset, enable, strobe;
-   input [6:0] serial_addr;
-   input [31:0] serial_data;
-   input       serial_strobe;
-   
-   output reg [resolution-1:0] phase;
-   wire [resolution-1:0] freq;
-
-   setting_reg #(FREQADDR) sr_rxfreq0(.clock(clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(freq));
-
-   always @(posedge clk)
-     if(reset)
-       phase <= #1 32'b0;
-     else if(serial_strobe & (serial_addr == PHASEADDR))
-       phase <= #1 serial_data;
-     else if(enable & strobe)
-       phase <= #1 phase + freq;
-
-endmodule // phase_acc
-
-