+++ /dev/null
-// -*- verilog -*-
-//
-// USRP - Universal Software Radio Peripheral
-//
-// Copyright (C) 2003 Matt Ettus
-//
-// This program is free software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation; either version 2 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program; if not, write to the Free Software
-// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
-//
-
-// Interface to Cypress FX2 bus
-// A packet is 512 Bytes. Each fifo line is 4 bytes
-// Fifo has 1024 or 2048 lines
-
-module bus_interface
- ( input usbclk,
- input reset,
- inout [15:0] usbdata, // TRISTATE
- input wire [5:0] usbctl,
- output wire [5:0] usbrdy,
- output [31:0] txdata,
- input [31:0] rxdata,
- input txclk,
- input txstrobe,
- input rxclk,
- input rxstrobe,
- output [11:0] debugbus,
- input clear_status
- );
-
- parameter IN_CHANNELS = 1;
- parameter OUT_CHANNELS = 1;
- parameter bitmask = (IN_CHANNELS*2)-1;
-
- wire have_space, have_pkt_rdy;
- wire WR, RD, OE;
- reg tx_underrun, rx_overrun;
-
- assign WR = usbctl[0];
- assign RD = usbctl[1];
- assign OE = usbctl[2];
-
- assign usbrdy[0] = have_space;
- assign usbrdy[1] = have_pkt_rdy;
- assign usbrdy[2] = tx_underrun;
- assign usbrdy[3] = rx_overrun;
-
- reg [IN_CHANNELS*2*16-1:0] fifo_in;
- wire [OUT_CHANNELS*2*16-1:0] fifo_out;
-
- wire [15:0] usbdata_in = usbdata;
-
- reg select_out;
- reg select_in;
-
- reg commit;
- reg rd_next;
- reg [15:0] usbdata_out;
- wire [10:0] txfifolevel,rxfifolevel;
- reg [8:0] write_count;
- wire tx_empty;
- wire tx_full;
- wire rx_empty;
- wire rx_full;
- wire [31:0] txd;
- wire rdreq;
-
- // Tri-state bus macro
- bustri bustri(.data(usbdata_out),
- .enabledt(OE),
- .tridata(usbdata) );
-
- //////////////////////////////////////////////
- // TX Side (USB --> DAC)
- always @(posedge usbclk, posedge reset)
- begin
- if(reset)
- begin
- fifo_in <= #1 0;
- write_count <= #1 0;
- end
- else
- if(WR & ~write_count[8])
- begin
- case(write_count[0])
- 1'b0 : fifo_in[31:16] <= #1 usbdata_in; // I
- 1'b1 : fifo_in[15:0] <= #1 usbdata_in; // Q
- endcase
- write_count <= #1 write_count + 9'd1;
- end
- else
- write_count <= #1 WR ? write_count : 9'b0;
- end
-
- always @(posedge usbclk)
- if(reset)
- commit <= #1 1'b0;
- else
- if(write_count[0] && ~write_count[8] && WR)
- commit <= #1 1'b1;
- else
- commit <= #1 1'b0;
-
- assign rdreq = txstrobe & !tx_empty;
- assign txdata = tx_empty ? 32'b0 : txd;
-
- always @(posedge txclk)
- if(reset)
- tx_underrun <= 1'b0;
- else if(txstrobe & tx_empty)
- tx_underrun <= 1'b1;
- else if(clear_status)
- tx_underrun <= 1'b0;
-
- fifo_1c_2k txfifo (.data ( fifo_in ),
- .wrreq ( commit ),
- .wrclk ( usbclk ),
-
- .q ( txd ),
- .rdreq ( rdreq),
- .rdclk ( txclk ),
-
- .aclr ( reset ),
-
- .rdempty ( tx_empty ),
- .rdusedw ( ),
- .wrfull ( tx_full ),
- .wrusedw ( txfifolevel )
- );
-
- assign have_space = (txfifolevel <= (2048-128));
-
- //////////////////////////////
- // Receive FIFO (ADC --> USB)
-
- always @(posedge rxclk)
- if(reset)
- rx_overrun <= 1'b0;
- else if(rxstrobe & rx_full)
- rx_overrun <= 1'b1;
- else if(clear_status)
- rx_overrun <= 1'b0;
-
- always @(select_out, fifo_out)
- case(select_out)
- 0 : usbdata_out = fifo_out[31:16]; // I
- 1 : usbdata_out = fifo_out[15:0]; // Q
- endcase
-
-/*
- always @(posedge usbclk, posedge reset)
- if(reset)
- usbdata_out <= #1 16'b0;
- else
- if(select_out)
- usbdata_out = fifo_out[31:16];
- else
- usbdata_out = fifo_out[15:0];
- */
-
- always @(negedge usbclk, posedge reset)
- if(reset)
- select_out <= #1 1'b0;
- else if(~RD)
- select_out <= #1 1'b0;
- else
- select_out <= #1 ~select_out;
-
- fifo_1c_2k rxfifo (.data ( rxdata ), // counter ),
- .wrreq (rxstrobe & ~rx_full ),
- .wrclk ( rxclk ),
-
- .q ( fifo_out ),
- .rdreq ( select_out ),// & RD ), // FIXME
- .rdclk ( usbclk ),
-
- .aclr ( reset ),
-
- .rdempty ( rx_empty ),
- .rdusedw ( rxfifolevel ),
- .wrfull ( rx_full ),
- .wrusedw ( )
- );
-
- assign have_pkt_rdy = (rxfifolevel >= 128);
-
- // Debugging Aids
- assign debugbus[0] = tx_underrun;
- assign debugbus[1] = rx_overrun;
- assign debugbus[2] = tx_empty;
- assign debugbus[3] = tx_full;
- assign debugbus[4] = rx_empty;
- assign debugbus[5] = rx_full;
- assign debugbus[6] = txstrobe;
- assign debugbus[7] = rxstrobe;
- assign debugbus[8] = select_out;
- assign debugbus[9] = rxstrobe & ~rx_full;
- assign debugbus[10] = have_space;
- assign debugbus[11] = have_pkt_rdy;
-
-endmodule // bus_interface
-
projects / debian / gnuradio / blobdiff