Remove usrp1 and usrp2 FPGA files. These are now hosted at:

[debian/gnuradio] / usrp / fpga / inband_lib / usb_packet_fifo.v

diff --git a/usrp/fpga/inband_lib/usb_packet_fifo.v b/usrp/fpga/inband_lib/usb_packet_fifo.v
deleted file mode 100755 (executable)
index c416e2b..0000000
--- a/usrp/fpga/inband_lib/usb_packet_fifo.v
+++ /dev/null
@@ -1,112 +0,0 @@
-module usb_packet_fifo 
-  ( input       reset,
-    input       clock_in,
-    input       clock_out,
-    input       [15:0]ram_data_in,
-    input       write_enable,
-    output  reg [15:0]ram_data_out,
-    output  reg pkt_waiting,
-    output  reg have_space,
-    input       read_enable,
-    input       skip_packet          ) ;
-
-    /* Some parameters for usage later on */
-    parameter DATA_WIDTH = 16 ;
-    parameter NUM_PACKETS = 4 ;
-
-    /* Create the RAM here */
-    reg [DATA_WIDTH-1:0] usb_ram [256*NUM_PACKETS-1:0] ;
-
-    /* Create the address signals */
-    reg [7-2+NUM_PACKETS:0] usb_ram_ain ;
-    reg [7:0] usb_ram_offset ;
-    reg [1:0] usb_ram_packet ;
-
-    wire [7-2+NUM_PACKETS:0] usb_ram_aout ;
-    reg isfull;
-
-    assign usb_ram_aout = {usb_ram_packet,usb_ram_offset} ;
-    
-    // Check if there is one full packet to process
-    always @(usb_ram_ain, usb_ram_aout)
-    begin
-        if (reset)
-            pkt_waiting <= 0;
-        else if (usb_ram_ain == usb_ram_aout)
-            pkt_waiting <= isfull;
-        else if (usb_ram_ain > usb_ram_aout)
-            pkt_waiting <= (usb_ram_ain - usb_ram_aout) >= 256;
-        else
-            pkt_waiting <= (usb_ram_ain + 10'b1111111111 - usb_ram_aout) >= 256;
-    end
-    
-    // Check if there is room
-    always @(usb_ram_ain, usb_ram_aout)
-    begin
-        if (reset)
-            have_space <= 1;
-        else if (usb_ram_ain == usb_ram_aout)
-            have_space <= ~isfull;   
-        else if (usb_ram_ain > usb_ram_aout)
-            have_space <= (usb_ram_ain - usb_ram_aout) <= 256 * (NUM_PACKETS - 1);
-        else
-            have_space <= (usb_ram_aout - usb_ram_ain) >= 256;
-    end
-
-    /* RAM Write Address process */
-    always @(posedge clock_in)
-    begin
-        if( reset )
-            usb_ram_ain <= 0 ;
-        else
-            if( write_enable ) 
-              begin
-                usb_ram_ain <= usb_ram_ain + 1 ;
-                if (usb_ram_ain + 1 == usb_ram_aout)
-                   isfull <= 1;
-              end
-    end
-
-    /* RAM Writing process */
-    always @(posedge clock_in)
-    begin
-        if( write_enable ) 
-          begin
-            usb_ram[usb_ram_ain] <= ram_data_in ;
-          end
-    end
-
-    /* RAM Read Address process */
-    always @(posedge clock_out)
-    begin
-        if( reset ) 
-          begin
-            usb_ram_packet <= 0 ;
-            usb_ram_offset <= 0 ;
-            isfull <= 0;
-          end
-        else
-            if( skip_packet )
-              begin
-                usb_ram_packet <= usb_ram_packet + 1 ;
-                usb_ram_offset <= 0 ;
-              end
-            else if(read_enable)
-                if( usb_ram_offset == 8'b11111111 )
-                  begin
-                    usb_ram_offset <= 0 ;
-                    usb_ram_packet <= usb_ram_packet + 1 ;
-                  end
-                else
-                    usb_ram_offset <= usb_ram_offset + 1 ;
-            if (usb_ram_ain == usb_ram_aout)
-               isfull <= 0;                       
-    end
-
-    /* RAM Reading Process */
-    always @(posedge clock_out)
-    begin
-        ram_data_out <= usb_ram[usb_ram_aout] ;
-    end
-
-endmodule
\ No newline at end of file