# source this file; set up for tests
-# Copyright (C) 2009-2011 Free Software Foundation, Inc.
+# Copyright (C) 2009-2016 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# We use a trap below for cleanup. This requires us to go through
# hoops to get the right exit status transported through the handler.
-# So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
+# So use 'Exit STATUS' instead of 'exit STATUS' inside of the tests.
# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
# sh inside this function.
Exit () { set +e; (exit $1); exit $1; }
# Print warnings (e.g., about skipped and failed tests) to this file number.
# Override by defining to say, 9, in init.cfg, and putting say,
-# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition
-# of TESTS_ENVIRONMENT in your tests/Makefile.am file.
+# export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2
+# in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file.
# This is useful when using automake's parallel tests mode, to print
# the reason for skip/failure to console, rather than to the .log files.
: ${stderr_fileno_=2}
-warn_ () { echo "$@" 1>&$stderr_fileno_; }
+# Note that correct expansion of "$*" depends on IFS starting with ' '.
+# Always write the full diagnostic to stderr.
+# When stderr_fileno_ is not 2, also emit the first line of the
+# diagnostic to that file descriptor.
+warn_ ()
+{
+ # If IFS does not start with ' ', set it and emit the warning in a subshell.
+ case $IFS in
+ ' '*) printf '%s\n' "$*" >&2
+ test $stderr_fileno_ = 2 \
+ || { printf '%s\n' "$*" | sed 1q >&$stderr_fileno_ ; } ;;
+ *) (IFS=' '; warn_ "$@");;
+ esac
+}
fail_ () { warn_ "$ME_: failed test: $@"; Exit 1; }
skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; }
+fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; }
framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; }
+# This is used to simplify checking of the return value
+# which is useful when ensuring a command fails as desired.
+# I.e., just doing `command ... &&fail=1` will not catch
+# a segfault in command for example. With this helper you
+# instead check an explicit exit code like
+# returns_ 1 command ... || fail
+returns_ () {
+ # Disable tracing so it doesn't interfere with stderr of the wrapped command
+ { set +x; } 2>/dev/null
+
+ local exp_exit="$1"
+ shift
+ "$@"
+ test $? -eq $exp_exit && ret_=0 || ret_=1
+
+ if test "$VERBOSE" = yes && test "$gl_set_x_corrupts_stderr_" = false; then
+ set -x
+ fi
+ { return $ret_; } 2>/dev/null
+}
+
# Sanitize this shell to POSIX mode, if possible.
DUALCASE=1; export DUALCASE
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
# ? - not ok
gl_shell_test_script_='
test $(echo y) = y || exit 1
+f_local_() { local v=1; }; f_local_ || exit 1
score_=10
if test "$VERBOSE" = yes; then
test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9
if test "$re_shell_" = __current__; then
# 'eval'ing this code makes Solaris 10's /bin/sh exit with
# $? set to 2. It does not evaluate any of the code after the
- # "unexpected" first `('. Thus, we must run it in a subshell.
+ # "unexpected" first '('. Thus, we must run it in a subshell.
( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
else
"$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
st_=$?
# $re_shell_ works just fine. Use it.
- test $st_ = 10 && break
+ if test $st_ = 10; then
+ gl_set_x_corrupts_stderr_=false
+ break
+ fi
# If this is our first marginally acceptable shell, remember it.
if test "$st_:$marginal_" = 9: ; then
*x*) opts_=-x ;;
*) opts_= ;;
esac
+ re_shell=$re_shell_
+ export re_shell
exec "$re_shell_" $opts_ "$0" --no-reexec "$@"
echo "$ME_: exec failed" 1>&2
exit 127
fi
fi
+# If this is bash, turn off all aliases.
+test -n "$BASH_VERSION" && unalias -a
+
+# Note that when supporting $EXEEXT (transparently mapping from PROG_NAME to
+# PROG_NAME.exe), we want to support hyphen-containing names like test-acos.
+# That is part of the shell-selection test above. Why use aliases rather
+# than functions? Because support for hyphen-containing aliases is more
+# widespread than that for hyphen-containing function names.
test -n "$EXEEXT" && shopt -s expand_aliases
# Enable glibc's malloc-perturbing option.
# a partition, or to undo any other global state changes.
cleanup_ () { :; }
-if ( diff --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
- compare () { diff -u "$@"; }
-elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
- compare () { cmp -s "$@"; }
+# Emit a header similar to that from diff -u; Print the simulated "diff"
+# command so that the order of arguments is clear. Don't bother with @@ lines.
+emit_diff_u_header_ ()
+{
+ printf '%s\n' "diff -u $*" \
+ "--- $1 1970-01-01" \
+ "+++ $2 1970-01-01"
+}
+
+# Arrange not to let diff or cmp operate on /dev/null,
+# since on some systems (at least OSF/1 5.1), that doesn't work.
+# When there are not two arguments, or no argument is /dev/null, return 2.
+# When one argument is /dev/null and the other is not empty,
+# cat the nonempty file to stderr and return 1.
+# Otherwise, return 0.
+compare_dev_null_ ()
+{
+ test $# = 2 || return 2
+
+ if test "x$1" = x/dev/null; then
+ test -s "$2" || return 0
+ emit_diff_u_header_ "$@"; sed 's/^/+/' "$2"
+ return 1
+ fi
+
+ if test "x$2" = x/dev/null; then
+ test -s "$1" || return 0
+ emit_diff_u_header_ "$@"; sed 's/^/-/' "$1"
+ return 1
+ fi
+
+ return 2
+}
+
+if diff_out_=`exec 2>/dev/null; diff -u "$0" "$0" < /dev/null` \
+ && diff -u Makefile "$0" 2>/dev/null | grep '^[+]#!' >/dev/null; then
+ # diff accepts the -u option and does not (like AIX 7 'diff') produce an
+ # extra space on column 1 of every content line.
+ if test -z "$diff_out_"; then
+ compare_ () { diff -u "$@"; }
+ else
+ compare_ ()
+ {
+ if diff -u "$@" > diff.out; then
+ # No differences were found, but Solaris 'diff' produces output
+ # "No differences encountered". Hide this output.
+ rm -f diff.out
+ true
+ else
+ cat diff.out
+ rm -f diff.out
+ false
+ fi
+ }
+ fi
+elif
+ for diff_opt_ in -U3 -c '' no; do
+ test "$diff_opt_" = no && break
+ diff_out_=`exec 2>/dev/null; diff $diff_opt_ "$0" "$0" </dev/null` && break
+ done
+ test "$diff_opt_" != no
+then
+ if test -z "$diff_out_"; then
+ compare_ () { diff $diff_opt_ "$@"; }
+ else
+ compare_ ()
+ {
+ if diff $diff_opt_ "$@" > diff.out; then
+ # No differences were found, but AIX and HP-UX 'diff' produce output
+ # "No differences encountered" or "There are no differences between the
+ # files.". Hide this output.
+ rm -f diff.out
+ true
+ else
+ cat diff.out
+ rm -f diff.out
+ false
+ fi
+ }
+ fi
+elif cmp -s /dev/null /dev/null 2>/dev/null; then
+ compare_ () { cmp -s "$@"; }
else
- compare () { cmp "$@"; }
+ compare_ () { cmp "$@"; }
fi
+# Usage: compare EXPECTED ACTUAL
+#
+# Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more.
+# Otherwise, propagate $? to caller: any diffs have already been printed.
+compare ()
+{
+ # This looks like it can be factored to use a simple "case $?"
+ # after unchecked compare_dev_null_ invocation, but that would
+ # fail in a "set -e" environment.
+ if compare_dev_null_ "$@"; then
+ return 0
+ else
+ case $? in
+ 1) return 1;;
+ *) compare_ "$@";;
+ esac
+ fi
+}
+
# An arbitrary prefix to help distinguish test directories.
testdir_prefix_ () { printf gt; }
case $path_dir_ in
'') fail_ "invalid path dir: '$1'";;
/*) abs_path_dir_=$path_dir_;;
- *) abs_path_dir_=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \
- || fail_ "invalid path dir: $path_dir_";;
+ *) abs_path_dir_=$initial_cwd_/$path_dir_;;
esac
case $abs_path_dir_ in
*:*) fail_ "invalid path dir: '$abs_path_dir_'";;
fi
initial_cwd_=$PWD
- fail=0
pfx_=`testdir_prefix_`
test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
|| fail_ "failed to create temporary directory in $initial_cwd_"
- cd "$test_dir_"
+ cd "$test_dir_" || fail_ "failed to cd to temporary directory"
# As autoconf-generated configure scripts do, ensure that IFS
# is defined initially, so that saving and restoring $IFS works.
{
case $# in
2);;
- *) fail_ "Usage: $ME DIR TEMPLATE";;
+ *) fail_ "Usage: mktempd_ DIR TEMPLATE";;
esac
destdir_=$1
# Disallow any trailing slash on specified destdir:
# it would subvert the post-mktemp "case"-based destdir test.
case $destdir_ in
- /) ;;
+ / | //) destdir_slash_=$destdir;;
*/) fail_ "invalid destination dir: remove trailing slash(es)";;
+ *) destdir_slash_=$destdir_/;;
esac
case $template_ in
esac
# First, try to use mktemp.
- d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
- || fail=1
+ d=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` &&
# The resulting name must be in the specified directory.
- case $d in "$destdir_"*);; *) fail=1;; esac
+ case $d in "$destdir_slash_"*) :;; *) false;; esac &&
# It must have created the directory.
- test -d "$d" || fail=1
+ test -d "$d" &&
# It must have 0700 permissions. Handle sticky "S" bits.
- perms=`ls -dgo "$d" 2>/dev/null|tr S -` || fail=1
- case $perms in drwx------*) ;; *) fail=1;; esac
-
- test $fail = 0 && {
+ perms=`ls -dgo "$d" 2>/dev/null` &&
+ case $perms in drwx--[-S]---*) :;; *) false;; esac && {
echo "$d"
return
}
i_=1
while :; do
X_=`rand_bytes_ $nx_`
- candidate_dir_="$destdir_/$base_template_$X_"
+ candidate_dir_="$destdir_slash_$base_template_$X_"
err_=`mkdir -m 0700 "$candidate_dir_" 2>&1` \
&& { echo "$candidate_dir_"; return; }
test $MAX_TRIES_ -le $i_ && break;