retired reset run_and_init/halt

[fw/openocd] / testing / examples / SAM7S256Test / prj / sam7s256_jtagkey.cfg

diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
index e802499c5a0f368e2da1182ed17632716f7020c7..634b5026ce9bf7357ce79744d3d52ac2b9c60c56 100644 (file)
--- a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
@@ -1,43 +1,42 @@
-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-# tell gdb our flash memory map\r
-# and enable flash programming\r
-gdb_memory_map enable\r
-gdb_flash_program enable\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Amontec JTAGkey A"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-jtag_speed 0\r
-jtag_nsrst_delay 200\r
-jtag_ntrst_delay 200\r
-\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config srst_only srst_pulls_trst\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-daemon_startup reset\r
-\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target arm7tdmi little run_and_init 0 arm7tdmi\r
-run_and_halt_time 0 30\r
-\r
-target_script 0 reset .\prj\sam7s256_reset.script\r
-\r
-working_area 0 0x00200000 0x4000 nobackup\r
-\r
-#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
-flash bank at91sam7 0 0 0 0 0\r
-\r
-# For more information about the configuration files, take a look at:\r
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger\r
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little 0 arm7tdmi
+
+target_script 0 reset .\prj\sam7s256_reset.script
+
+working_area 0 0x00200000 0x4000 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank at91sam7 0 0 0 0 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger