cfi: remove typos and code cleanup

[fw/openocd] / testing / build.test2 / README.txt

diff --git a/testing/build.test2/README.txt b/testing/build.test2/README.txt
old mode 100755 (executable)
new mode 100644 (file)
index f4bedcc..d71c14b
--- a/testing/build.test2/README.txt
+++ b/testing/build.test2/README.txt
@@ -1,59 +1,59 @@
-\r
-This makefile is how I Duane Ellis (openocd@duaneellis.com) builds\r
-openocd test purposes on Cygwin. I have included it here so others\r
-might also make use of the same configuration that I use to develop\r
-Openocd.\r
-\r
---Duane Ellis\r
-\r
-To make use of it do the following:\r
-\r
-(1)    Check out openocd in the standard way.\r
-\r
-For example - in cygwin, type this:\r
-\r
-    bash$  mkdir -p /home/duane/test\r
-    bash$  cd /home/duane/test\r
-    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd\r
-\r
-(2)    COPY this folder "right above" where you have OpenOCD.\r
-\r
-    bash$  cd /home/duane/test\r
-    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.\r
-\r
-(3) OPTIONALLY\r
-\r
-    You might want to review the file "local.uses"\r
-    Change options and so forth at the top of the file.\r
-\r
-(4)    Initially, you need to download some additional files.\r
-       These include "libftdi", "libconfuse", and the ftd2xx drivers.\r
-\r
-(5)    You also need to build the supporting libraries and install them\r
-       (They are installed "locally" only)\r
-\r
-       Type this command:\r
-\r
-    bash$ cd /home/duane/test\r
-\r
-    bash$ make initial.build\r
-\r
-         which:  (1) downloads files\r
-                 (2) builds the libs\r
-                 (3) builds OpenOCD\r
-\r
-(6)     As you hack upon OpenOCD... to rebuild OpenOCD...\r
-       \r
-    bash$ cd /home/duane/test\r
-\r
-    bash$ make remake\r
-\r
-         which: (1) re-bootstraps \r
-                (2) re-configures\r
-                (3) re-builds\r
-                (4) re-installs.\r
-   \r
-=======\r
-**END**\r
-=======\r
-\r
+
+This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
+openocd test purposes on Cygwin. I have included it here so others
+might also make use of the same configuration that I use to develop
+Openocd.
+
+--Duane Ellis
+
+To make use of it do the following:
+
+(1)    Check out openocd in the standard way.
+
+For example - in cygwin, type this:
+
+    bash$  mkdir -p /home/duane/test
+    bash$  cd /home/duane/test
+    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
+
+(2)    COPY this folder "right above" where you have OpenOCD.
+
+    bash$  cd /home/duane/test
+    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
+
+(3) OPTIONALLY
+
+    You might want to review the file "local.uses"
+    Change options and so forth at the top of the file.
+
+(4)    Initially, you need to download some additional files.
+       These include "libftdi", "libconfuse", and the ftd2xx drivers.
+
+(5)    You also need to build the supporting libraries and install them
+       (They are installed "locally" only)
+
+       Type this command:
+
+    bash$ cd /home/duane/test
+
+    bash$ make initial.build
+
+         which:  (1) downloads files
+                 (2) builds the libs
+                 (3) builds OpenOCD
+
+(6)     As you hack upon OpenOCD... to rebuild OpenOCD...
+       
+    bash$ cd /home/duane/test
+
+    bash$ make remake
+
+         which: (1) re-bootstraps 
+                (2) re-configures
+                (3) re-builds
+                (4) re-installs.
+   
+=======
+**END**
+=======
+