flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / testing / build.test2 / README.txt

diff --git a/testing/build.test2/README.txt b/testing/build.test2/README.txt
deleted file mode 100755 (executable)
index f4bedcc..0000000
--- a/testing/build.test2/README.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-\r
-This makefile is how I Duane Ellis (openocd@duaneellis.com) builds\r
-openocd test purposes on Cygwin. I have included it here so others\r
-might also make use of the same configuration that I use to develop\r
-Openocd.\r
-\r
---Duane Ellis\r
-\r
-To make use of it do the following:\r
-\r
-(1)    Check out openocd in the standard way.\r
-\r
-For example - in cygwin, type this:\r
-\r
-    bash$  mkdir -p /home/duane/test\r
-    bash$  cd /home/duane/test\r
-    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd\r
-\r
-(2)    COPY this folder "right above" where you have OpenOCD.\r
-\r
-    bash$  cd /home/duane/test\r
-    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.\r
-\r
-(3) OPTIONALLY\r
-\r
-    You might want to review the file "local.uses"\r
-    Change options and so forth at the top of the file.\r
-\r
-(4)    Initially, you need to download some additional files.\r
-       These include "libftdi", "libconfuse", and the ftd2xx drivers.\r
-\r
-(5)    You also need to build the supporting libraries and install them\r
-       (They are installed "locally" only)\r
-\r
-       Type this command:\r
-\r
-    bash$ cd /home/duane/test\r
-\r
-    bash$ make initial.build\r
-\r
-         which:  (1) downloads files\r
-                 (2) builds the libs\r
-                 (3) builds OpenOCD\r
-\r
-(6)     As you hack upon OpenOCD... to rebuild OpenOCD...\r
-       \r
-    bash$ cd /home/duane/test\r
-\r
-    bash$ make remake\r
-\r
-         which: (1) re-bootstraps \r
-                (2) re-configures\r
-                (3) re-builds\r
-                (4) re-installs.\r
-   \r
-=======\r
-**END**\r
-=======\r
-\r