+++ /dev/null
-# -*- mode: makefile -*-
-#
-default: _complain_
-
-include ./local.uses
-
-
-SRC_DIR ?= $(HERE)/openocd
-BUILD_SUFFIX ?= $(BUILD_MACHINE)
-BUILD_DIR =$(HERE)/openocd.$(BUILD_SUFFIX)
-
-checkout:
- svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-remove.install:
- rm -rf ${INSTALL_DIR}
-
-#========================================
-# Win32 Build Permutations
-# none
-# parport
-# ftd2xx - (ftdichip)
-# libftd
-CONFIG_OPTIONS_win32_none =
-CONFIG_OPTIONS_win32_parport = --enable-parport
-CONFIG_OPTIONS_win32_ftd2xx = --enable-parport --enable-ft2232_ftd2xx --with-ftd2xx-win32-zipdir=$(FTD2XX_WIN32_DIR)
-
-CYGWIN_EASY_PERMUTATIONS += none
-CYGWIN_EASY_PERMUTATIONS += parport
-CYGWIN_EASY_PERMUTATIONS += ftd2xx
-
-MINGW32_EASY_PERMUTATIONS += none
-MINGW32_EASY_PERMUTATIONS += parport
-MINGW32_EASY_PERMUTATIONS += ftd2xx
-
-
-# This is not a possible permutation, it is manual :-(
-# Why? Because "libftdi" installs things into install/include
-# which would efect the 'ftd2xx' win32 build
-CONFIG_OPTIONS_win32_libftdi = --enable-parport --enable-ft2232_libftdi
-
-# Default build for win32... is the ftd2xx type build.
-PERMUTE_win32 ?= ftd2xx
-CONFIG_OPTIONS_win32 ?= $(CONFIG_OPTIONS_win32_$(PERMUTE_win32))
-CONFIG_OPTIONS_cygwin = $(CONFIG_OPTIONS_win32)
-CONFIG_OPTIONS_mingw32 = $(CONFIG_OPTIONS_win32)
-
-#========================================
-# Linux Build Permuatations
-# none
-# parport
-# ft2232_ftd2xx
-# ft2232_libftdi
-CONFIG_OPTIONS_linux_none =
-LINUX_EASY_PERMUTATIONS += none
-
-CONFIG_OPTIONS_linux_parport = --enable-parport
-LINUX_EASY_PERMUTATIONS += parport
-
-CONFIG_OPTIONS_linux_ft2232_libftdi = --enable-parport --enable-ft2232-libftdi
-#this cannot be done as part of the permutations.
-#LINUX_EASY_PERMUTATIONS += ft2232_libftdi
-
-CONFIG_OPTIONS_linux_ft2232_ftd2xx_static = \
- --enable-parport \
- --enable-ft2232-ftd2xx --with-ftd2xx-lib=static --with-ftd2xx-linux-tardir=$(FTD2XX_LINUX_DIR)
-LINUX_EASY_PERMUTATIONS += ft2232_ftd2xx_static
-
-# this is not a possible permutation it is manual :-(
-# why? because it interfers with the other permutations
-# by "installing files" in the $(INSTALL_DIR)
-CONFIG_OPTIONS_linux_ftd2xx_installed = \
- --enable-parport \
- --enable-ft2232-ftd2xx \
- --with-ftd2xx-lib=shared
-
-# The default build permutation is
-PERMUTE_linux ?= ft2232_ftd2xx_static
-CONFIG_OPTIONS_linux = $(CONFIG_OPTIONS_linux_$(PERMUTE_linux))
-
-CONFIG_OPTIONS_darwin=\
- --enable-ftd2232-libftdi
-
-# Which build are we doing?
-CONFIG_OPTIONS := $(CONFIG_OPTIONS_$(BUILD_SYSNAME))
-
-bootstrap:
- cd $(SRC_DIR) && bash ./bootstrap
-
-clean::
- rm -rf $(BUILD_DIR)
-
-ifndef CFLAGS
-_CFLAGS=true
-else
-_CFLAGS=export CFLAGS="${CFLAGS}"
-endif
-
-
-# if this was given... then pass it on
-configure:
- @echo " Build Sysname: $(BUILD_SYSNAME)"
- @echo " Config Options: $(CONFIG_OPTIONS)"
- rm -rf $(BUILD_DIR)
- mkdir $(BUILD_DIR)
- ${_CFLAGS} && \
- cd $(BUILD_DIR) && \
- $(SRC_DIR)/configure \
- --prefix=$(PREFIX) \
- --exec-prefix=$(EXEC_PREFIX) \
- $(CONFIG_OPTIONS)
-
-build:
- cd $(BUILD_DIR) && $(MAKE)
-
-install:
- cd $(BUILD_DIR) && $(MAKE) install
-
-all: configure build install
-
-.PHONY: install
-
-# The "cygwin.libftdi" requires that libftdi be built
-# and installed *PRIOR* to running this target.
-# it is not part of the permutations because ...
-# it interfers with the ftd2xx based builds
-cygwin.libftdi:
- $(MAKE) -f Makefile.openocd bootstrap
- $(MAKE) BUILD_SUFFIX=$@ PERMUTE_win32=libftdi -f Makefile.openocd all
-
-cygwin.easy.permutations: remove.install ${CYGWIN_EASY_PERMUTATIONS:%=_cygwin.%}
-
-_cygwin.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- $(MAKE) PERMUTE_win32=$* BUILD_SUFFIX=cygwin.$* -f Makefile.openocd all
- $(EXEC_PREFIX)/bin/openocd -v
-
-mingw32.easy.permutations: remove.install ${MINGW32_EASY_PERMUTATIONS:%=_mingw32.%}
-
-# I (duane) build openocd-mingw32 via Cygwin.
-# Sadly, the "mingw32" buid for cygwin does not include
-# the required "elf.h" header files... so ...
-# we have them in our own private helper place.
-_mingw32.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- CFLAGS="-mno-cygwin -I$(HERE)/mingw32_help/include" \
- $(MAKE) -f Makefile.openocd all ;\
- $(EXEC_PREFIX)/bin/openocd -v
-
-win32.permutations: mingw32.permutations cygwin.permutations
-
-
-# SMOKE TEST - Build every linux permuation...
-# If "openocd -v" does exit(0) we are good enough.
-
-linux.easy.permutations: remove.install ${LINUX_EASY_PERMUTATIONS:%=_linux.%}
-
-
-_linux.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- $(MAKE) PERMUTE_linux=$* BUILD_SUFFIX=linux.$* -f Makefile.openocd all
- $(EXEC_PREFIX)/bin/openocd -v
-
-linux.ftd2xx_installed:
- ${MAKE} -f Makefile.openocd _$@
-
-linux.ft2232_libftdi:
- ${MAKE} -f Makefile.openocd _$@
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @exit 1
projects / fw / openocd / blobdiff