tcl/board: Add AM625 EVM basic support

[fw/openocd] / tcl / tools / firmware-recovery.tcl

diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl
index 8e017ce5b3cf55d04af4b7c3f2595b5728e918ac..9d7e0fce848dca903340ddff1e3c96ca3e3f9f9a 100644 (file)
--- a/tcl/tools/firmware-recovery.tcl
+++ b/tcl/tools/firmware-recovery.tcl
@@ -29,7 +29,7 @@ dump_part <name> <filename>   save partition's contents to a file
 erase_part <name>              erase the given partition
 flash_part <name> <filename>   erase, flash and verify the given partition
 ram_boot <filename>            load binary file to RAM and run it
-adapter_khz <freq>             set JTAG clock frequency in kHz
+adapter speed <freq>           set JTAG clock frequency in kHz
 
 For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run:
 openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
@@ -38,8 +38,8 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
     shutdown
 }
 
-# set default, can be overriden later
-adapter_khz 1000
+# set default, can be overridden later
+adapter speed 1000
 
 proc get_partition { name } {
     global partition_list