target/stm32l5x,stm32u5x: fix trace settings

[fw/openocd] / tcl / tools / firmware-recovery.tcl

diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl
index 718de0bd35f94e0029af0eb6467fe08d32e485c3..6a328cd2e37291c5ad2033d8d26f9f90d38a5bd3 100644 (file)
--- a/tcl/tools/firmware-recovery.tcl
+++ b/tcl/tools/firmware-recovery.tcl
@@ -1,9 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 echo "\n\nFirmware recovery helpers"
 echo "Use -c firmware_help to get help\n"
 
 set known_boards {
     "asus-rt-n16               ASUS RT-N16"
+    "asus-rt-n66u              ASUS RT-N66U"
+    "linksys-wag200g           Linksys WAG200G"
     "linksys-wrt54gl           Linksys WRT54GL v1.1"
+    "netgear-dg834v3           Netgear DG834G v3"
+    "tp-link_tl-mr3020         TP-LINK TL-MR3020"
+    "bt-homehubv1              BT HomeHub v1"
 }
 
 proc firmware_help { } {
@@ -24,7 +31,7 @@ dump_part <name> <filename>   save partition's contents to a file
 erase_part <name>              erase the given partition
 flash_part <name> <filename>   erase, flash and verify the given partition
 ram_boot <filename>            load binary file to RAM and run it
-adapter_khz <freq>             set JTAG clock frequency in kHz
+adapter speed <freq>           set JTAG clock frequency in kHz
 
 For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run:
 openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
@@ -33,8 +40,8 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
     shutdown
 }
 
-# set default, can be overriden later
-adapter_khz 1000
+# set default, can be overridden later
+adapter speed 1000
 
 proc get_partition { name } {
     global partition_list