drivers/vdebug: add support for DAP level interface

[fw/openocd] / tcl / test / syntax1.cfg

diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg
index fb88d5ae1a26c298ab614b0cede0fc7c51a7c451..7735ee98cb29019ec7409882d07ef798a52c3c1f 100644 (file)
--- a/tcl/test/syntax1.cfg
+++ b/tcl/test/syntax1.cfg
@@ -1,12 +1,14 @@
-jtag_nsrst_delay 200
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+adapter srst delay 200
 jtag_ntrst_delay 200
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
 #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
+adapter assert trst assert srst
+adapter deassert trst deassert srst
 
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
@@ -16,14 +18,14 @@ jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0
 #daemon_startup reset
 
 set _TARGETNAME [format "%s.cpu" lpc2148]
-target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0
+target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0
 
-$_TARGETNAME configure -event reset-init { 
-soft_reset_halt 
-mvb 0xE01FC040 0x01 
+$_TARGETNAME configure -event reset-init {
+soft_reset_halt
+mvb 0xE01FC040 0x01
 }
 
 
 
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
-
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765