bluenrg: add support for bluenrg-lps device and board

[fw/openocd] / tcl / test / syntax1.cfg

diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg
index 93beefcafe6d9635fa31425316952e605e041ed9..2e661889596ec1583eb6ef6f8698ba47d1e2fe3e 100644 (file)
--- a/tcl/test/syntax1.cfg
+++ b/tcl/test/syntax1.cfg
@@ -1,12 +1,12 @@
-jtag_nsrst_delay 200
+adapter srst delay 200
 jtag_ntrst_delay 200
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
 #LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
+adapter assert trst assert srst
+adapter deassert trst deassert srst
 
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
@@ -16,7 +16,7 @@ jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0
 #daemon_startup reset
 
 set _TARGETNAME [format "%s.cpu" lpc2148]
-target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0
+target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
 soft_reset_halt
@@ -25,5 +25,5 @@ mvb 0xE01FC040 0x01
 
 
 
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
-
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765