-jtag_nsrst_delay 200
+adapter srst delay 200
jtag_ntrst_delay 200
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
-jtag_reset 1 1
-jtag_reset 0 0
+adapter assert trst assert srst
+adapter deassert trst deassert srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
#daemon_startup reset
set _TARGETNAME [format "%s.cpu" lpc2148]
-target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0
+target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0
$_TARGETNAME configure -event reset-init {
soft_reset_halt
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
-
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765