}
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_TAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16 kB
+if { [info exists WORKAREASIZE] } {
+ set _WORKAREASIZE $WORKAREASIZE
+} else {
+ set _WORKAREASIZE 0x1000
+}
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME xmc4xxx 0x0C000000 0 0 0 $_TARGETNAME
if { ![using_hla] } {
cortex_m reset_config sysresetreq
}
-adapter_khz 1000
+adapter speed 1000