target library: configuration files for openocd tested with Atmel SAM-ICE V6 JTAG.

[fw/openocd] / tcl / target / xba_revA3.cfg

diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg
index 007cb9e1d712af675715bcc304794035df22f9de..fb02c687c82d5983513733c1b3c8f711155056c0 100644 (file)
--- a/tcl/target/xba_revA3.cfg
+++ b/tcl/target/xba_revA3.cfg
@@ -1,14 +1,14 @@
 #Written by: Michael Schwingen <rincewind@discworld.dascon.de>
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME xba_reva3
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
   # default to big endian
    set  _ENDIAN big
 }
@@ -28,8 +28,9 @@ jtag_ntrst_delay 100
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
+
 $_TARGETNAME configure -event reset-init {
        #############################################################################
        # setup expansion bus CS, disable external wdt
@@ -75,12 +76,13 @@ $_TARGETNAME configure -event reset-init {
        flash probe 0
 }
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0
 
 
-flash bank cfi 0x50000000 0x400000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x50000000 0x400000 2 2 $_TARGETNAME
 
-init 
+init
 reset init
 # set big endian mode
 reg XSCALE_CTRL 0xF8