Revert "target: remove unused working area 'user' field"

[fw/openocd] / tcl / target / tmpa910.cfg

diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
index 29d2d6efa91029586c4918a24dd95e6ef292c0ae..5d41c8c2ad7076c26809dd69fceba15bc3b3ead7 100644 (file)
--- a/tcl/target/tmpa910.cfg
+++ b/tcl/target/tmpa910.cfg
@@ -3,21 +3,17 @@
 ######################################
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME tmpa910
+   set _CHIPNAME tmpa910
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
+# Toshiba TMPA910 series MCUs are always little endian as per datasheet.
+set _ENDIAN little
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x07926031
 }
 
@@ -32,7 +28,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-jtag_nsrst_delay 20
+adapter_nsrst_delay 20
 jtag_ntrst_delay 20
 
 ######################
@@ -42,15 +38,10 @@ jtag_ntrst_delay 20
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
-# built-in RAM0
-#working_area 0 0xf8004000 0x4000 nobackup
-# built-in RAM1
-#working_area 1 0xf8008000 0x4000 nobackup
-# built-in RAM2
-#working_area 2 0xf800c000 0x4000 nobackup
-# built-in RAM 0-2 48k total
-#working_area 0 0xf8004000 0xc000 nobackup
+# Internal RAM-0 (16kB): 0xf8004000
+# Internal RAM-1 (16kB): 0xf8008000
+# Internal RAM-2 (16kB): 0xf800c000
 
-# Internal sram1 memory
+# Use internal RAM-0, RAM-1, and RAM-2 as working area (48kB total).
 $_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0xc000 \
 -work-area-backup 0