Toshiba TMPA900 config: Fix incorrect working area.

[fw/openocd] / tcl / target / tmpa910.cfg

diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
index fa6f87b00769d58d2eb46de889ab9d0f7885140e..36874d94d0124944705fc022c76644532b966898 100644 (file)
--- a/tcl/target/tmpa910.cfg
+++ b/tcl/target/tmpa910.cfg
@@ -42,15 +42,10 @@ jtag_ntrst_delay 20
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
-# built-in RAM0
-#working_area 0 0xf8004000 0x4000 nobackup
-# built-in RAM1
-#working_area 1 0xf8008000 0x4000 nobackup
-# built-in RAM2
-#working_area 2 0xf800c000 0x4000 nobackup
-# built-in RAM 0-2 48k total
-#working_area 0 0xf8004000 0xc000 nobackup
-
-# Internal sram1 memory
+# Internal RAM-0 (16kB): 0xf8004000
+# Internal RAM-1 (16kB): 0xf8008000
+# Internal RAM-2 (16kB): 0xf800c000
+
+# Use internal RAM-0, RAM-1, and RAM-2 as working area (48kB total).
 $_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0xc000 \
 -work-area-backup 0