Add common LPC2xxx setup procedure, use in all LPC2xxx files.

[fw/openocd] / tcl / target / tmpa900.cfg

diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg
index 1bdf6a1bb367feba1b6a799d50dae47cf91cce0f..a5513915a169796b16fe2e6462372a2c8800278f 100644 (file)
--- a/tcl/target/tmpa900.cfg
+++ b/tcl/target/tmpa900.cfg
@@ -2,15 +2,15 @@
 # Target:    Toshiba TMPA910
 ######################################
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME tmpa910
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -32,15 +32,15 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-jtag_nsrst_delay 20
+adapter_nsrst_delay 20
 jtag_ntrst_delay 20
 
 ######################
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # built-in RAM0
 #working_area 0 0xf8004000 0x4000 nobackup
@@ -52,5 +52,5 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA
 #working_area 0 0xf8004000 0xc000 nobackup
 
 # Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \
+$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x8000 \
 -work-area-backup 0