target: add Espressif ESP32-S2 basic support

[fw/openocd] / tcl / target / tmpa900.cfg

diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg
index 80adc65221dad85205ff8a04dc7a395dcc36ac1c..8e70700201cb38a21b3ac8804cfb88430bff096a 100644 (file)
--- a/tcl/target/tmpa900.cfg
+++ b/tcl/target/tmpa900.cfg
@@ -1,27 +1,23 @@
 ######################################
-# Target:    Toshiba TMPA910
+# Target:    Toshiba TMPA900
 ######################################
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME tmpa910
+   set _CHIPNAME tmpa900
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
+# Toshiba TMPA900 series MCUs are always little endian as per datasheet.
+set _ENDIAN little
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x07926031
 }
 
-#TMPA910 has following IDs:
+#TMPA900 has following IDs:
 # CP15.0 register 0x41069265
 # CP15.1 register 0x1d152152
 # ARM core 0x07926031
@@ -32,25 +28,19 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-jtag_nsrst_delay 20
+adapter srst delay 20
 jtag_ntrst_delay 20
 
 ######################
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
-# built-in RAM0
-#working_area 0 0xf8004000 0x4000 nobackup
-# built-in RAM1
-#working_area 1 0xf8008000 0x4000 nobackup
-# built-in RAM2
-#working_area 2 0xf800c000 0x4000 nobackup
-# built-in RAM 0-2 48k total
-#working_area 0 0xf8004000 0xc000 nobackup
+# Internal RAM-0 (16kB): 0xf8004000
+# Internal RAM-1 (8kB): 0xf8008000
 
-# Internal sram1 memory
-$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x8000 \
+# Use internal RAM-0 and RAM-1 as working area (24kB total).
+$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x6000 \
 -work-area-backup 0