+# SPDX-License-Identifier: GPL-2.0-or-later
+
#
# Texas Instruments DaVinci family: TMS320DM365
#
# NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
# and that the work area is used only with a kernel mmu context ...
$_TARGETNAME configure \
- -work-area-virt [expr 0xfffe0000 + 0x4000] \
+ -work-area-virt [expr {0xfffe0000 + 0x4000}] \
-work-area-phys [dict get $dm365 sram1] \
-work-area-size 0x4000 \
-work-area-backup 0
# be absolutely certain the JTAG clock will work with the worst-case
# CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns
# on the PLL and starts using it. OK to speed up after clock setup.
-adapter_khz 1500
-$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 }
+adapter speed 1500
+$_TARGETNAME configure -event "reset-start" { adapter speed 1500 }
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable