tcl/target/ti_k3: Rename m4 target as general purpose mcu

[fw/openocd] / tcl / target / ti_cc3220sf.cfg

diff --git a/tcl/target/ti_cc3220sf.cfg b/tcl/target/ti_cc3220sf.cfg
index f7d9bfe17aab2aff1e67d2584d4b9f1dc3b74609..74269aa66ca494f1d9756293b130009e4d3c6b33 100644 (file)
--- a/tcl/target/ti_cc3220sf.cfg
+++ b/tcl/target/ti_cc3220sf.cfg
@@ -10,3 +10,31 @@ source [find target/ti_cc32xx.cfg]
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cc3220sf 0 0 0 0 $_TARGETNAME
+
+#
+# On CC32xx family of devices, sysreqreset is disabled, and vectreset is
+# blocked by the boot loader (stops in a while(1) statement). srst reset can
+# leave the target in a state that prevents debug. The following uses the
+# soft_reset_halt command to reset and halt the target. Then the PC and stack
+# are initialized from internal flash. This allows for a more reliable reset,
+# but with two caveats: it only works for the SF variant that has internal
+# flash, and it only resets the CPU and not any peripherals.
+#
+
+proc ocd_process_reset_inner { MODE } {
+
+       soft_reset_halt
+
+       # Initialize MSP, PSP, and PC from vector table at flash 0x01000800
+       mem2array boot 32 0x01000800 2
+
+       reg msp $boot(0)
+       reg psp $boot(0)
+       reg pc $boot(1)
+
+       if { 0 == [string compare $MODE run ] } {
+               resume
+       }
+
+       cc32xx.cpu invoke-event reset-end
+}