STR750: Add SMI interface support

[fw/openocd] / tcl / target / str912.cfg

diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index b8f8f1acf5efc4c18dabdff7be684fcafd34f7fb..9b0a708308f4aa1ab18cf3a4a2c2aac33726aeb4 100644 (file)
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -15,7 +15,7 @@ if { [info exists ENDIAN] } {
 # jtag speed. We need to stick to 16kHz until we've finished reset.
 jtag_rclk 16
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
@@ -60,11 +60,10 @@ $_TARGETNAME configure -event reset-init {
        flash protect 0 0 7 off
 }
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
+set _FLASHNAME $_CHIPNAME.flash0
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash1
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME