tcl/target: add SPDX tag

[fw/openocd] / tcl / target / str750.cfg

diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index ef6e7954e48dc39e57ffc4cf31e93d03852962bb..5af7b74a701350fde484d6f23115bbd983852e09 100644 (file)
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #STR750 CPU
 
 if { [info exists CHIPNAME] } {
@@ -19,7 +21,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # jtag speed
-adapter_khz 10
+adapter speed 10
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
@@ -29,15 +31,15 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
-adapter_nsrst_delay 500
+adapter srst delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
-$_TARGETNAME configure -event reset-start { adapter_khz 10 }
+$_TARGETNAME configure -event reset-start { adapter speed 10 }
 $_TARGETNAME configure -event reset-init {
-       adapter_khz 3000
+       adapter speed 3000
 
        init_smi
 # Because the hardware cannot be interrogated for the protection state