tcl/target: Add support for Renesas R8A779A0 V3U SoC

[fw/openocd] / tcl / target / stm32wlx.cfg

diff --git a/tcl/target/stm32wlx.cfg b/tcl/target/stm32wlx.cfg
index 98c9a7ee911e37e9d4b9070a6c937049da22a6ba..961850ad18476e6204c7a0ba919a003c0fae197c 100644 (file)
--- a/tcl/target/stm32wlx.cfg
+++ b/tcl/target/stm32wlx.cfg
@@ -38,7 +38,7 @@ swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU
 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 if {[using_jtag]} {
-       swj_newdap $_CHIPNAME bs -irlen 5
+       jtag newtap $_CHIPNAME bs -irlen 5
 }
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -46,8 +46,8 @@ target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.flash stm32l4x 0x08000000 0 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.otp   stm32l4x 0x1fff7000 0 0 0 $_TARGETNAME
 
 # Common knowledges tells JTAG speed should be <= F_CPU/6.
 # F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on