tcl/board: Add AM654 EVM basic support

[fw/openocd] / tcl / target / stm32mp15x.cfg

diff --git a/tcl/target/stm32mp15x.cfg b/tcl/target/stm32mp15x.cfg
index a11f6665ee127b6e392246ef116b6ff4adfb53ed..4a8bc866c767ae341552ba580ebf60a0de6ac5a5 100644 (file)
--- a/tcl/target/stm32mp15x.cfg
+++ b/tcl/target/stm32mp15x.cfg
@@ -59,10 +59,10 @@ $_CHIPNAME.cpu1 cortex_a maskisr on
 $_CHIPNAME.cpu0 cortex_a dacrfixup on
 $_CHIPNAME.cpu1 cortex_a dacrfixup on
 
-cti create $_CHIPNAME.cti.sys  -dap $_CHIPNAME.dap -ap-num 1 -ctibase 0xE0094000
-cti create $_CHIPNAME.cti.cpu0 -dap $_CHIPNAME.dap -ap-num 1 -ctibase 0xE00D8000
-cti create $_CHIPNAME.cti.cpu1 -dap $_CHIPNAME.dap -ap-num 1 -ctibase 0xE00D9000
-cti create $_CHIPNAME.cti.cm4  -dap $_CHIPNAME.dap -ap-num 2 -ctibase 0xE0043000
+cti create $_CHIPNAME.cti.sys  -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE0094000
+cti create $_CHIPNAME.cti.cpu0 -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE00D8000
+cti create $_CHIPNAME.cti.cpu1 -dap $_CHIPNAME.dap -ap-num 1 -baseaddr 0xE00D9000
+cti create $_CHIPNAME.cti.cm4  -dap $_CHIPNAME.dap -ap-num 2 -baseaddr 0xE0043000
 
 # interface does not work while srst is asserted
 # this is target specific, valid for every board
@@ -114,7 +114,7 @@ $_CHIPNAME.ap2  configure -event reset-deassert-pre  {dbgmcu_enable_debug}
 $_CHIPNAME.cpu0 configure -event reset-deassert-pre  {$::_CHIPNAME.cpu0 arp_examine}
 $_CHIPNAME.cpu1 configure -event reset-deassert-pre  {$::_CHIPNAME.cpu1 arp_examine allow-defer}
 $_CHIPNAME.cpu0 configure -event reset-deassert-post {toggle_cpu0_dbg_claim0}
-$_CHIPNAME.cm4  configure -event reset-deassert-post {$::_CHIPNAME.cm4 arp_examine;if {[$::_CHIPNAME.ap2 curstate] == "halted"} {$::_CHIPNAME.cm4 arp_poll;$::_CHIPNAME.cm4 arp_halt}}
+$_CHIPNAME.cm4  configure -event reset-deassert-post {$::_CHIPNAME.cm4 arp_examine;if {[$::_CHIPNAME.ap2 curstate] == "halted"} {$::_CHIPNAME.cm4 arp_poll;$::_CHIPNAME.cm4 arp_poll;$::_CHIPNAME.cm4 arp_halt}}
 $_CHIPNAME.ap1  configure -event examine-start       {dap init}
 $_CHIPNAME.ap2  configure -event examine-start       {dbgmcu_enable_debug}
 $_CHIPNAME.cpu0 configure -event examine-end         {detect_cpu1}