flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / stm32lx_stlink.cfg

diff --git a/tcl/target/stm32lx_stlink.cfg b/tcl/target/stm32lx_stlink.cfg
deleted file mode 100644 (file)
index 6bec2b5..0000000
--- a/tcl/target/stm32lx_stlink.cfg
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# STM32lx stlink pseudo target
-#
-
-if { [info exists CHIPNAME] == 0 } {
-   set CHIPNAME stm32lx
-}
-
-if { [info exists CPUTAPID] == 0 } {
-   set CPUTAPID 0x2ba01477
-}
-
-if { [info exists WORKAREASIZE] == 0 } {
-   set WORKAREASIZE 0x2800
-}
-
-source [find target/stm32_stlink.cfg]
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32lx 0 0 0 0 $_TARGETNAME
-
-proc stm32l_enable_HSI {} {
-       # Enable HSI as clock source
-       echo "STM32L: Enabling HSI"
-
-       # Set HSION in RCC_CR
-       mww 0x40023800 0x00000101
-
-       # Set HSI as SYSCLK
-       mww 0x40023808 0x00000001
-}
-
-$_TARGETNAME configure -event reset-init {
-       stm32l_enable_HSI
-}