target: Add support for ls1088a

[fw/openocd] / tcl / target / stm32l1.cfg

diff --git a/tcl/target/stm32l1.cfg b/tcl/target/stm32l1.cfg
index 054fa9b74f64667d5093f8ebbaef6e0b8a6899f9..a81d7c7985bc4ddab4e60a8d41a5c037af4a7dd9 100644 (file)
--- a/tcl/target/stm32l1.cfg
+++ b/tcl/target/stm32l1.cfg
@@ -23,9 +23,9 @@ if { [info exists WORKAREASIZE] } {
 
 # JTAG speed should be <= F_CPU/6.
 # F_CPU after reset is 2MHz, so use F_JTAG max = 333kHz
-adapter_khz 300
+adapter speed 300
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
@@ -73,13 +73,13 @@ proc stm32l_enable_HSI {} {
        echo "STM32L: Enabling HSI"
 
        # Set HSION in RCC_CR
-       mww 0x40023800 0x00000101
+       mmw 0x40023800 0x00000101 0
 
        # Set HSI as SYSCLK
-       mww 0x40023808 0x00000001
+       mmw 0x40023808 0x00000001 0
 
        # Increase JTAG speed
-       adapter_khz 2000
+       adapter speed 2000
 }
 
 $_TARGETNAME configure -event reset-init {
@@ -87,7 +87,7 @@ $_TARGETNAME configure -event reset-init {
 }
 
 $_TARGETNAME configure -event reset-start {
-       adapter_khz 300
+       adapter speed 300
 }
 
 $_TARGETNAME configure -event examine-end {