}
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID] } {
- # FIXME this never gets used to override defaults...
- set _BSTAPID $BSTAPID
-} else {
- # See STM Document RM0038 Section 30.6.1 Rev. 12
-
- # Low and medium density
- set _BSTAPID1 0x06416041
- # Cat.2 device (medium+ density)
- set _BSTAPID2 0x06429041
- # Cat.3 device (medium+ density)
- set _BSTAPID3 0x06427041
- # Cat.4 device, STM32L15/6xxD or Cat.3 device, some STM32L15/6xxC-A models
- set _BSTAPID4 0x06436041
- # Cat.5 device (high density), STM32L15/6xxE
- set _BSTAPID5 0x06437041
-}
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
if {[using_jtag]} {
- swj_newdap $_CHIPNAME bs -irlen 5 \
- -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
- -expected-id $_BSTAPID4 -expected-id $_BSTAPID5
+ jtag newtap $_CHIPNAME bs -irlen 5
}
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0