target: Add support for ls1088a

[fw/openocd] / tcl / target / stm32l0.cfg

diff --git a/tcl/target/stm32l0.cfg b/tcl/target/stm32l0.cfg
index e09af80018d6504d070f5bc1c1f1b019b39e3fbe..7653d13efee9df238476f0a90ae71686b2678a9a 100644 (file)
--- a/tcl/target/stm32l0.cfg
+++ b/tcl/target/stm32l0.cfg
@@ -24,9 +24,9 @@ if { [info exists WORKAREASIZE] } {
 
 # JTAG speed should be <= F_CPU/6.
 # F_CPU after reset is ~2MHz, so use F_JTAG max = 333kHz
-adapter_khz 300
+adapter speed 300
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 
 if { [info exists CPUTAPID] } {
     set _CPUTAPID $CPUTAPID
@@ -70,7 +70,7 @@ proc stm32l0_enable_HSI16 {} {
        while { ([ mrw 0x4002100c ] & 0x0c) != 0x04 } { }
 
        # Increase speed
-       adapter_khz 2500
+       adapter speed 2500
 }
 
 $_TARGETNAME configure -event reset-init {
@@ -78,7 +78,7 @@ $_TARGETNAME configure -event reset-init {
 }
 
 $_TARGETNAME configure -event reset-start {
-       adapter_khz 300
+       adapter speed 300
 }
 
 $_TARGETNAME configure -event examine-end {