tcl/board: add ESP32 config for ESP USB Bridge board

[fw/openocd] / tcl / target / stm32h7x.cfg

diff --git a/tcl/target/stm32h7x.cfg b/tcl/target/stm32h7x.cfg
index 877976c1acca3f8da61c0ac2251200422b73828d..5aae93861909293c1ab4f67d8a86c66c24691506 100644 (file)
--- a/tcl/target/stm32h7x.cfg
+++ b/tcl/target/stm32h7x.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # script for stm32h7x family
 
 #
@@ -142,7 +144,7 @@ if {[using_jtag]} {
 # usage does not work with HLA, so is not done by default. That change could be
 # made in a local configuration file if connect_assert_srst mode is needed for
 # a specific application and a non-HLA adapter is in use.
-reset_config srst_only srst_nogate
+reset_config srst_nogate
 
 if {![using_hla]} {
    # if srst is not fitted use SYSRESETREQ to
@@ -232,9 +234,7 @@ if {[set $_CHIPNAME.DUAL_CORE]} {
 
 # like mrw, but with target selection
 proc stm32h7x_mrw {used_target reg} {
-       set value ""
-       $used_target mem2array value 32 $reg 1
-       return $value(0)
+       return [$used_target read_memory $reg 32 1]
 }
 
 # like mmw, but with target selection