+# SPDX-License-Identifier: GPL-2.0-or-later
+
# script for stm32f7x family
#
mmw 0xE0042008 0x00001800 0
}
-$_TARGETNAME configure -event trace-config {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
+ targets $_targetname
+
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
# change this value accordingly to configure trace pins
# assignment
mmw 0xE0042004 0x00000020 0
}
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"
+
$_TARGETNAME configure -event reset-init {
# If the HSE was previously enabled and the external clock source
# disappeared, RCC_CR.HSERDY can get stuck at 1 and the PLL cannot be