flash/nor/at91samd: Use 32-bit register writes for ST-Link compat

[fw/openocd] / tcl / target / stm32f2x_stlink.cfg

diff --git a/tcl/target/stm32f2x_stlink.cfg b/tcl/target/stm32f2x_stlink.cfg
deleted file mode 100644 (file)
index bb113e0..0000000
--- a/tcl/target/stm32f2x_stlink.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#
-#
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME stm32
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 64kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x10000
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x2ba01477
-}
-
-stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f2x 0x08000000 0 0 0 $_TARGETNAME