Allow transports to override the selected target (hla configs unification)

[fw/openocd] / tcl / target / stm32f2x.cfg

diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg
index 4e43f0a1a0ae8ec92ea2b8ad5384f2d39f73dd4d..a4aded007c576e75c39652b369052f723c26de1a 100644 (file)
--- a/tcl/target/stm32f2x.cfg
+++ b/tcl/target/stm32f2x.cfg
@@ -42,9 +42,13 @@ if {[using_jtag]} {
 if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # See STM Document RM0033
-  # Section 32.6.3 - corresponds to Cortex-M3 r2p0
-   set _CPUTAPID 0x4ba00477
+   if { [using_jtag] } {
+      # See STM Document RM0033
+      # Section 32.6.3 - corresponds to Cortex-M3 r2p0
+      set _CPUTAPID 0x4ba00477
+   } {
+      set _CPUTAPID 0x2ba01477
+   }
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
@@ -59,7 +63,7 @@ if { [info exists BSTAPID] } {
 }
 
 if {[using_jtag]} {
- jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+ swj_newdap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
 }
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -70,6 +74,8 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}