tcl/target/imx8m: use hwthread rtos

[fw/openocd] / tcl / target / stm32f0x.cfg

diff --git a/tcl/target/stm32f0x.cfg b/tcl/target/stm32f0x.cfg
index baac9b68d1e84f546083b3aad35e6e3b1c3f5b64..b20d036cf185f9c1189267fb3376a6cfa991f840 100644 (file)
--- a/tcl/target/stm32f0x.cfg
+++ b/tcl/target/stm32f0x.cfg
@@ -52,9 +52,9 @@ set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME
 
 # adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter_khz 1000
+adapter speed 1000
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 
 reset_config srst_nogate
 
@@ -66,7 +66,7 @@ if {![using_hla]} {
 
 proc stm32f0x_default_reset_start {} {
        # Reset clock is HSI (8 MHz)
-       adapter_khz 1000
+       adapter speed 1000
 }
 
 proc stm32f0x_default_examine_end {} {
@@ -86,7 +86,7 @@ proc stm32f0x_default_reset_init {} {
        mmw 0x40021004 0x00000002 0 ;# RCC_CFGR |= SW[1]
 
        # Boost JTAG frequency
-       adapter_khz 8000
+       adapter speed 8000
 }
 
 # Default hooks