SMDK6410 is not target, move file to board

[fw/openocd] / tcl / target / stellaris.cfg

diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index b663ce3dc35f22a700b831b66ddf5da42140233f..d6314987574409f5c7e8b327e1a02cfd6411c88a 100644 (file)
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -1,5 +1,12 @@
 # TI/Luminary Stellaris LM3S chip family
 
+# Luminary chips support both JTAG and SWD transports.
+# Adapt based on what transport is active.
+source [find target/swj-dp.tcl]
+
+# For now we ignore the SPI and UART options, which
+# are usable only for ISP style initial flash programming.
+
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -18,6 +25,12 @@ if { [info exists CPUTAPID ] } {
    set _CPUTAPID 0x0ba00477
 }
 
+# SWD DAP, and JTAG TAP, take same params for now;
+# ... even though SWD ignores all except TAPID, and
+# JTAG shouldn't need anything more then irlen. (and TAPID).
+swj_newdap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
+       -expected-id $_CPUTAPID -ignore-version
+
 if { [info exists WORKAREASIZE ] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
@@ -25,9 +38,6 @@ if { [info exists WORKAREASIZE ] } {
    set _WORKAREASIZE 0x2000
 }
 
-jtag newtap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
-       -expected-id $_CPUTAPID -ignore-version
-
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
 
@@ -67,7 +77,7 @@ $_TARGETNAME configure -event reset-start {
        set device_class [expr (([mrw 0x400fe000] >> 16) & 0xff)]
        if {$device_class == 0 || $device_class == 1 || $device_class == 3} {
                # Sandstorm, Fury and DustDevil are able to use NVIC SYSRESETREQ
-               cortex_m3 reset_config systesetreq
+               cortex_m3 reset_config sysresetreq
        } else {
                # Tempest and newer default to using NVIC VECTRESET
                # this does mean a reset-init event handler is required to reset