target config files: Fix whitespace issues.

[fw/openocd] / tcl / target / stellaris.cfg

diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index 3ab5c0b97d01c3d34965914c575972d5de3a51bb..a272e66f487a0dc34dcee789a5d3f1bb1a478a5e 100644 (file)
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -6,7 +6,7 @@
 
 global _DEVICECLASS
 
-if { [info exists DEVICECLASS ] } {
+if { [info exists DEVICECLASS] } {
    set _DEVICECLASS $DEVICECLASS
 } else {
    set _DEVICECLASS 0xff
@@ -20,9 +20,9 @@ source [find target/swj-dp.tcl]
 # are usable only for ISP style initial flash programming.
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME lm3s
+   set _CHIPNAME lm3s
 }
 
 # CPU TAP ID 0x1ba00477 for early Sandstorm parts
@@ -31,7 +31,7 @@ if { [info exists CHIPNAME] } {
 # CPU TAP ID 0x4ba00477 for Cortex-M3 r2p0 (on Tempest)
 # ... we'll ignore the JTAG version field, rather than list every
 # chip revision that turns up.
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x0ba00477
@@ -43,7 +43,7 @@ if { [info exists CPUTAPID ] } {
 swj_newdap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
        -expected-id $_CPUTAPID -ignore-version
 
-if { [info exists WORKAREASIZE ] } {
+if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE $WORKAREASIZE
 } else {
    # default to 8K working area
@@ -55,7 +55,7 @@ target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
 
 # 8K working area at base of ram, not backed up
 #
-# NOTE:  you may need or want to reconfigure the work area;
+# NOTE: you may need or want to reconfigure the work area;
 # some parts have just 6K, and you may want to use other
 # addresses (at end of mem not beginning) or back it up.
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
@@ -63,7 +63,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 # JTAG speed ... slow enough to work with a 12 MHz RC oscillator;
 # LM3S parts don't support RTCK
 #
-# NOTE:  this may be increased by a reset-init handler, after it
+# NOTE: this may be increased by a reset-init handler, after it
 # configures and enables the PLL.  Or you might need to decrease
 # this, if you're using a slower clock.
 adapter_khz 500