cfg: Don't check BS TAP IDCODE in STM32 configs

[fw/openocd] / tcl / target / stellaris.cfg

diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg
index 06f27c56807be3df913ec4638558ecd16d5dd46c..4fe99394aa83191e1b3c4e056a88a6a5a7b3b40e 100644 (file)
--- a/tcl/target/stellaris.cfg
+++ b/tcl/target/stellaris.cfg
@@ -52,7 +52,7 @@ if { [info exists WORKAREASIZE] } {
 }
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
 
 # 8K working area at base of ram, not backed up
 #
@@ -155,14 +155,17 @@ $_TARGETNAME configure -event reset-start {
        }
 
        if {$device_class == 0 || $device_class == 1 ||
-               $device_class == 3 || $device_class == 5} {
-               # Sandstorm, Fury, DustDevil and Blizzard are able to use NVIC SYSRESETREQ
-               cortex_m3 reset_config sysresetreq
+               $device_class == 3 || $device_class == 5 || $device_class == 0xa} {
+               if {![using_hla]} {
+                  # Sandstorm, Fury, DustDevil, Blizzard and Snowflake are able to use NVIC SYSRESETREQ
+                  cortex_m reset_config sysresetreq
+               }
        } else {
-               # Tempest and Firestorm default to using NVIC VECTRESET
-               # peripherals will need reseting manually, see proc reset_peripherals
-               cortex_m3 reset_config vectreset
-
+               if {![using_hla]} {
+                  # Tempest and Firestorm default to using NVIC VECTRESET
+                  # peripherals will need reseting manually, see proc reset_peripherals
+                  cortex_m reset_config vectreset
+               }
                # reset peripherals, based on code in
                # http://www.ti.com/lit/er/spmz573a/spmz573a.pdf
                reset_peripherals $device_class