# ... even though SWD ignores all except TAPID, and
# JTAG shouldn't need anything more then irlen. (and TAPID).
swj_newdap $_CHIPNAME cpu -irlen 4 -irmask 0xf \
- -expected-id $_CPUTAPID -ignore-version
+ -expected-id $_CPUTAPID -ignore-version
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
}
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
# 8K working area at base of ram, not backed up
#
# NOTE: this may be increased by a reset-init handler, after it
# configures and enables the PLL. Or you might need to decrease
# this, if you're using a slower clock.
-adapter_khz 500
+adapter speed 500
source [find mem_helper.tcl]
}
$_TARGETNAME configure -event reset-start {
- adapter_khz 500
+ adapter speed 500
#
# When nRST is asserted on most Stellaris devices, it clears some of
} else {
if {![using_hla]} {
# Tempest and Firestorm default to using NVIC VECTRESET
- # peripherals will need reseting manually, see proc reset_peripherals
+ # peripherals will need resetting manually, see proc reset_peripherals
cortex_m reset_config vectreset
}
# reset peripherals, based on code in