tcl/target: add SPDX tag

[fw/openocd] / tcl / target / samsung_s3c2450.cfg

diff --git a/tcl/target/samsung_s3c2450.cfg b/tcl/target/samsung_s3c2450.cfg
index 89a2ea8ad5bc54e9a45588cc4ea7abd14d4bead8..801e1bc972ba0a2797f0a5c63b8872a5a0edcd3c 100644 (file)
--- a/tcl/target/samsung_s3c2450.cfg
+++ b/tcl/target/samsung_s3c2450.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Target configuration for the Samsung 2450 system on chip
 # Processor       : ARM926ejs (wb) rev 0 (v4l)
 # Info:   JTAG tap: s3c2450.cpu tap/device found: 0x07926F0F
@@ -7,11 +9,11 @@
 #
 # RCLK?
 #
-# adapter_khz 0
+# adapter speed 0
 #
 # Really low clock during reset?
 #
-# adapter_khz 1
+# adapter speed 1
 
 if { [info exists CHIPNAME] } {
   set _CHIPNAME $CHIPNAME
@@ -36,7 +38,7 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # FIX!!!!! should this really use srst_pulls_trst?
 # With srst_pulls_trst "reset halt" will not reset into the