tcl/target: add SPDX tag

[fw/openocd] / tcl / target / samsung_s3c2440.cfg

diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg
index 12bb4085a8de4aca193555539201fbbce8b60b75..d976a8e3f851174933b2f9fe388e848ef205ff0e 100644 (file)
--- a/tcl/target/samsung_s3c2440.cfg
+++ b/tcl/target/samsung_s3c2440.cfg
@@ -1,35 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Target configuration for the Samsung 2440 system on chip
 # Tested on a S3C2440 Evaluation board by keesj
 # Processor       : ARM920Tid(wb) rev 0 (v4l)
 # Info:   JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME s3c2440
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME s3c2440
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
   # this defaults to a bigendian
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x0032409d
 }
 
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
 
 #reset configuration
 reset_config trst_and_srst
-